DT125R ARCHIVE

http://www.ebay.co.uk/itm/110794577817?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Hello, Just got back from the engineers. I know I've told many about my plans for the Upside Down Fork conversion cause I've been asking a lot of questions. Since I decided not to grind the stem down I have instead gone the other way. I'm using the original Tapered bearings to install the Yokes. To do thi...

the DT stem is a straight swap on 97-99 models, My yokes are from a 98 model YZ and using a press have pressed out the YZ stem and pressed in the DT stem there was between 0.12-0.15mm diameter difference which is not noticeable (i mean theres no play in the stem whatsoever ) slapped on some loctite for ultim...

	Forum	Replies	Views	Last Post
USD Forks WR250F Just bought these... (Preview)	FORKS	6	1540	Sep 2, 2012 by Calum122
http://www.ebay.co.uk/itm/110794577817?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
USD How To Conversion Properly Yamaha WR250F USD Conversion Using an Extension ( 1 2 ) (Preview)	FORKS	56	5286	Jun 12, 2013 by Calum122
Hello, Just got back from the engineers. I know I've told many about my plans for the Upside Down Fork conversion cause I've been asking a lot of questions. Since I decided not to grind the stem down I have instead gone the other way. I'm using the original Tapered bearings to install the Yokes. To do thi...
Fitting USD forks USD YZ for people who want to fit USD's to their DT's Read this WITH PICS :D (Preview)	FORKS	6	7501	Oct 28, 2013 by Gambodia
the DT stem is a straight swap on 97-99 models, My yokes are from a 98 model YZ and using a press have pressed out the YZ stem and pressed in the DT stem there was between 0.12-0.15mm diameter difference which is not noticeable (i mean theres no play in the stem whatsoever ) slapped on some loctite for ultim...