DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: trying to start the project dt for the 1st time


Guru

Status: Offline
Posts: 1053
Date:
trying to start the project dt for the 1st time
Permalink  
 


http://www.youtube.com/watch?v=DF1tL2eiHj0



__________________


Guru

Status: Offline
Posts: 1332
Date:
Permalink  
 

hey tripr

i cant realy hear to much in the vid ,could you put one up with the mic nearer the engine

ok so you got spark ?

is fuel gettin to the cylinder ?

basics i know but its caught me out before with old fuel and wrong plug gap and the bike was all over the place lol

any other info etc etc .....lets get this beast going biggrin



__________________


Guru

Status: Offline
Posts: 1053
Date:
Permalink  
 

ill try an get a better one tomorrow m8 cos i keep that dt at my mrs house....
its not far off is it i think im missing connecting something in my wiring up. it fires up straight away on the proper loom i tried the engine out in my blue one first no problems at all..
iv give it fresh 2t today drained tank for fresh petrol an cleaned the carb out completly .. sparks good an consistant it was lightly fuel soaked when i pulled it out so the fueling seems ok. i even tried a different inition coil but still the same thing.
( it feels like the sparks not continueing after im finished kicking it over)

__________________


Guru

Status: Offline
Posts: 1332
Date:
Permalink  
 

are the genny and flywheel known to be good ?

have you got a wiring diagram/manual etc ?

dtdan's bike was earthing itself to the frame intermittently and gave similar probs

also give your ht a quik trim down and screw the plugcap back on

have you checked your woodruff key

soz for all the questions but i love little puzzles like this

keep us posted fella smilesmilesmile



__________________


Guru

Status: Offline
Posts: 1053
Date:
Permalink  
 

i woulda thought so m8 the flywheel an starting gears all ok with it starting off the kick no problems on the other frame, i have got the diagram an that as a pdf but it no use really as this offroader has no loom iv just hardwired the cdi an starter coil to the engine.. no battery killswitch ignition or lights



__________________


Guru

Status: Offline
Posts: 1332
Date:
Permalink  
 

ok kool

get the diagram printed

then highlight all the parts you have on the bike

this way you will be able to trace every wire that you have on the bike and where it goes to with the diagram right there in your hand

elec probs are a right pain in the arse



__________________


Guru

Status: Offline
Posts: 1053
Date:
Permalink  
 

good plan m8 ill give that a go im not usually to bad electrically it them engines that get me stuck ,, im so close to really thought i was gonna be off wheeliein up the lane today i heard all the bikes goin up my field today too i was gutted , stuck there kickin away in the back yard.

__________________


Guru

Status: Offline
Posts: 1332
Date:
Permalink  
 

oh the joys lol

bet you could smell em aswell

you be there soon man ....kickin arse biggrinbiggrinbiggrinbiggrinbiggrinbiggrin



__________________


Guru

Status: Offline
Posts: 1053
Date:
Permalink  
 

http://www.youtube.com/watch?v=QqACejTy8rA


few minor atlerations in my make shift wiring and it starts

Todays a good day off for a burn now see how it runs



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard