Right I'm trying to fit brushguards but the standard lever is too long and the bars have been shortened so the lever fouls on the guard. Anyone know if there is a shorter brake lever that will bolt straight on e.g. from a YZ or something ? Dont really wanna get new bars either.
Any ideas?
Gary.
yr the balls are to stop your leavers impaling someone so with guards shold be ok if not this is what i would do dremal the ball out a bit so it will slot back onto the leavers then glue it on then rap the leavers in black electrical tape
Robin I'm just assuming the next time I take it for test I get an MOT nerd that says "well the book says blah blah blah". I'm sure most people have had one of them at least once ??
Anyway, I might try what Toysoldier suggested but without the tape.
I already have a lever without the ball end bit, just incase you don't wanna ruin a MOT-passable lever? End will have to be filed down though as it's quite rough, PM me if interested
ive got these for sale mate, they are shorter then the standard 1's
Toyman, ask bradders to check my front master to see if it is the same, i know its a nisin 1, then we know what lever you need, my master is off a yz450
Steve I've already done the dremel thing - cut the ball off, cut 20mm off the lever, drilled the end of the lever and the ball, fitted a screw in the holes and araldited the two parts together. I'll let you know how i get on.
