DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> FORKS -> Front fork spindle to fork fitting
Post Info TOPIC: Front fork spindle to fork fitting
GADGET


Guru

Status: Offline
Posts: 1332
Date:
Front fork spindle to fork fitting
Permalink  
 

Try nevs diagram ,and yeah man tighten the spindle to torque settings then squeeze forks together and do the retaining nuts !,,,,http://dt125r.activeboard.com/t49744379/dt125r-front-wheel-parts-breakdown/ the wheel can't move along the spindle cos it has a bigger diameter

-- Edited by GADGET on Wednesday 22nd of August 2012 08:34:54 PM

__________________
zooankski


DTR Senior Member

Status: Offline
Posts: 164
Date:
Permalink  
 

Fitted the front wheel to a prject DT125r i am doing but notice there is only a spacer on the left and speedo drive on the right which looks correct as per diagrams. i am able to put pressure on the right fork leg to close the gap between it and the speedo drive and wondered if that is right? I am then able to nip up the 4 small nuts on the clamp to hold the fork leg there.

Maybe i am missing something? what stops the wheel moving over to the right if there is a small gap (3-4mm) between the speedo drive and fork?



__________________
DT125r project-here we go!
AndyYam


Guru

Status: Offline
Posts: 1017
Date:
Permalink  
 

Or... dont fit forks. Just wheelie everywhere!! ;)

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> FORKS -> Front fork spindle to fork fitting
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard