Either that or swap bearings so you get the right I/D, I had to have a new spindle made so I could get these TDR Italia wheels to fit on, with an extended shank and a tad taken off the collar.
-- Edited by NEV on Thursday 13th of September 2012 02:25:31 PM
So, I have a set of 17 inch rims from my brothers old ****ty XR. I am going to use my hubs from my DT wheels and relace them to the Supermoto rims. Anyone got any idea on what size spokes I would need? Guess I could just measure from the hub to the rim and find out myself huh?
Might be an idea to get hold of a DTX front hub Carlos, as you cant get a larger size disc on the normal DT hub mate. have a look in the spokes threads as I'm sure Gadget did something in there regarding relacing his, plus theres a post in there I put up about how to go about doing it.
Might be an idea to get hold of a DTX front hub Carlos, as you cant get a larger size disc on the normal DT hub mate. have a look in the spokes threads as I'm sure Gadget did something in there regarding relacing his, plus theres a post in there I put up about how to go about doing it.
I looked through that, seems to be for only if you're swapping from Yamaha parts, or other Yamahas. I might be tempted to use the whole front wheel from his bike. Has a huge disc on it already. I just think the spindle is thinner? Would machining my spindle as is do the trick? I'll go get some pictures in a second to show you the wheels and stuff etc. :)
