DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Dtx front disc?


DTR Senior Member

Status: Offline
Posts: 114
Date:
Dtx front disc?
Permalink  
 


Just bought a sm coversion for dtr forks wheels brakes etc off a dtx i fink but front disc is warped n much bigger than on dtr wheels anyone know where to buy them frm cheep as poss and tyres aswell 17"s

__________________


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

eBay. I reckon you could fit an rs125 front disc in there. That's what I've got on my sm setup. Cost me about £30

__________________

Always Originate, Never Pirate!

The Leviathan Project



Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

But that isn't a certainty. You'd need to check it out.

__________________

Always Originate, Never Pirate!

The Leviathan Project



DTR Senior Member

Status: Offline
Posts: 114
Date:
Permalink  
 

Ye will do mate thanks are you on dtx forks n brembo calipa?

__________________


Guru

Status: Offline
Posts: 853
Date:
Permalink  
 

I know this an old thread but I`m gonna update it for future new members or anyone that finds there in the same boat.
As I had to source the same front disk rotor as I needed for the above set up setup in the end. I searched high low for a cheap one

Best I could find online was A J Suttons. @ £53.12 but don`t quote me on twelve pence thohmm
Then I contacted the local yami dealer as the disk is in the exploding diagram but not the part number disbelief

When I asked the dealer its not in ther online catalog he said no it wont be as he was punching away on his keyboard

So They defo must have a seperate catalog so if on the Yami shops system theres a good chance its found its way on to the net

I`m yet to find this but &  bet any money it is on the net just needs someone to stumble into it one day perhaps but I will keep looking in the mean time!!! confuse

I got the part code of the dealer for future reference & so here it is smile

 

http://imageshack.us/photo/my-images/202/capturssse.jpg/

 

So I dug a bit deeper with the part number and also have found out the disc which is a 298mm is used aswell on the same as an XT660 biggrin

But I managed to get one from my local yami dealer for £43.00 Job donesmilesmilesmile



-- Edited by Ralzy on Tuesday 15th of January 2013 01:27:02 AM

__________________

 

 




Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard