DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: slipping out of gear


Guru

Status: Offline
Posts: 853
Date:
slipping out of gear
Permalink  
 


I had problems with mine from when i 1st bought it always had trouble with putting in neutral at lights always had to rock back n fourth wernt till Norfe stripped mine and said it was bent if its bent its proberly a good chance its been dropped at some stage



-- Edited by Ralzy on Saturday 20th of April 2013 08:08:32 PM

__________________

 

 




NEV


Guru

Status: Offline
Posts: 2515
Date:
Permalink  
 

Nathlaad wrote:

i prefer the term bellend


 Just up ythe road from Santa Pod that.

 



__________________

 



Guru

Status: Offline
Posts: 1294
Date:
Permalink  
 

Mine slips out of gear, it doesnt do it all the time maybe 1 every 2 or 3 days but i notice it, and it only does it if im riding a bit hard, i was lucky before because it slipped out and went over 12k rpm which is well over my redline lol



__________________

i blew my dt up ... but i fixed it.... Then i crashed it.... but i didnt fix it right and 2 scouser's come in the middle of the night and left me with a working bike 



Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

You using the roght gearbox oil?

__________________

Always Originate, Never Pirate!

The Leviathan Project



Guru

Status: Offline
Posts: 1294
Date:
Permalink  
 

Ive not changed it yet so i supose its right but im littlery on pennys atm im waiting for some cash to get in before i do a change

__________________

i blew my dt up ... but i fixed it.... Then i crashed it.... but i didnt fix it right and 2 scouser's come in the middle of the night and left me with a working bike 



DTR Trusted Engine Builder

Status: Offline
Posts: 1723
Date:
Permalink  
 

normaly always bent selector forks/seriously worn forks cause jumping out of gear, try exselaratin with ut foot on the back break in 2nd gear that normally makes it pop out of gear if box is on way out

 



__________________


Guru

Status: Offline
Posts: 1294
Date:
Permalink  
 

thanks norfe ill try that tomorrow, but it could be my riding when im shifting quick it might not be selecting it right

__________________

i blew my dt up ... but i fixed it.... Then i crashed it.... but i didnt fix it right and 2 scouser's come in the middle of the night and left me with a working bike 



DTR Legend

Status: Offline
Posts: 3766
Date:
Permalink  
 

set fire to it

__________________

K6 DRZ 400sm



Guru

Status: Offline
Posts: 1294
Date:
Permalink  
 

lol ill leave your suggestion till last nath and what oil do you guys recomend to put in because ill change it asap to see if that solves it

__________________

i blew my dt up ... but i fixed it.... Then i crashed it.... but i didnt fix it right and 2 scouser's come in the middle of the night and left me with a working bike 



DTR Legend

Status: Offline
Posts: 3766
Date:
Permalink  
 

Kerosene, lights up a treat lad

__________________

K6 DRZ 400sm



Guru

Status: Offline
Posts: 1294
Date:
Permalink  
 

lol nath your a massive troll

__________________

i blew my dt up ... but i fixed it.... Then i crashed it.... but i didnt fix it right and 2 scouser's come in the middle of the night and left me with a working bike 



DTR Legend

Status: Offline
Posts: 3766
Date:
Permalink  
 

i prefer the term bellend

__________________

K6 DRZ 400sm



Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

30w 5

Used to happen on my RS50 alot. But the gearbox was naff lol. Hate to admit it but it might be what norfe said

Thanks norfe.

__________________

Always Originate, Never Pirate!

The Leviathan Project



Guru

Status: Offline
Posts: 1294
Date:
Permalink  
 

Its not happing alot so it could just be old oil, and norfe do these gear box's use detent balls ? (no nath not them type of balls)

__________________

i blew my dt up ... but i fixed it.... Then i crashed it.... but i didnt fix it right and 2 scouser's come in the middle of the night and left me with a working bike 



DTR Trusted Engine Builder

Status: Offline
Posts: 1723
Date:
Permalink  
 

10/40 vauxhall engine oil thats what i used in mine

yes they do use the detent arm on the end of the drum but the springs indestructable really so id go with worn forksn if owt

 



__________________


Guru

Status: Offline
Posts: 1294
Date:
Permalink  
 

Norfe i tryed that and nothing happend it was fine

__________________

i blew my dt up ... but i fixed it.... Then i crashed it.... but i didnt fix it right and 2 scouser's come in the middle of the night and left me with a working bike 



Guru

Status: Offline
Posts: 668
Date:
Permalink  
 

if you discover its the forks i have 5 gearboxes hear andplenty of forks lemme know

__________________

getting there .....



DTR Trusted Engine Builder

Status: Offline
Posts: 1723
Date:
Permalink  
 

Danny0112 wrote:

Norfe i tryed that and nothing happend it was fine


 try some different oil,shunt make much difference like but if its slippin out of gear the odd time it will be a mechanical problem

 



__________________


DTR Legend

Status: Offline
Posts: 1853
Date:
Permalink  
 

Pretty sure my forks are bent/worn. Mine will jump from 2nd to neutral when i shift from first and red line to fuark. Only does it every so often mind. ALso selecting neutral is more difficult. Not too bothered will be doing an engine over haul this year any way.



__________________

 



Guru

Status: Offline
Posts: 1294
Date:
Permalink  
 

it hasnt slipped out today because ive been taking my time to change gear and yeh mine slipped out of 3rd into 2nd when i was about to change into 4th so it went past the redline

__________________

i blew my dt up ... but i fixed it.... Then i crashed it.... but i didnt fix it right and 2 scouser's come in the middle of the night and left me with a working bike 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard