DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> Exhausts -> End can ?
Post Info TOPIC: End can ?
Dt Danny


Guru

Status: Offline
Posts: 1294
Date:
End can ?
Permalink  
 

Any ideas how to seperate the end can from the expanny mines propper wedged in there



__________________

i blew my dt up ... but i fixed it.... Then i crashed it.... but i didnt fix it right and 2 scouser's come in the middle of the night and left me with a working bike 
zander


DTR Senior Member

Status: Offline
Posts: 282
Date:
Permalink  
 

try warm it up and use alot of wd-40 :D

__________________

Yamaha DT 125 RE -06
Reef


Guru

Status: Offline
Posts: 1231
Date:
Permalink  
 

Keep pulling from the rear of the bike, gripping the silencer with two hands and try to rotate whilst pulling ;)

__________________
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

Shouldn't be wedged in their too much. Even if it hasn't been removed for a while no reason why it should seize. Double check that you have removed everythong. Failuer to that i'd be inclined to take the full system off and inspect it whilst its off.

__________________

Always Originate, Never Pirate!

The Leviathan Project
Dt Danny


Guru

Status: Offline
Posts: 1294
Date:
Permalink  
 

thanks ill try that after and yeh cal when i take the exhaust off everything comes with it

__________________

i blew my dt up ... but i fixed it.... Then i crashed it.... but i didnt fix it right and 2 scouser's come in the middle of the night and left me with a working bike 
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> Exhausts -> End can ?
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard