DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Inlet manifold


DTR Member

Status: Offline
Posts: 5
Date:
Inlet manifold
Permalink  
 


Hi folks ,read this in a German site , seems a bit brutal , your thoughts on this please.

NOW REMOVE THE INLET MANIFOLD RUBBER FROM THE CRANKCASES, BY REMOVING THE 4, 10MM BOLTS ,REMOVE THE SMALL BLACK RUBBER 2 STROKE OIL FEED PIPE FROM THE RIGHT HAND SIDE OF THE MANIFOLD AND BLACK IT WITH A MATCH STICK OR SMALL SCREW. THEN CAREFULLY PRISE IT FROM THE CRANKCASES. 

 

WHEN YOU HAVE THE MANIFOLD FREE YOU WILL SEE A SQUARE RUBBER NOSE PROTRUDING FROM THE BOTTOM OF IT. THIS NEEDS REMOVING , CUT IT OFF WITH A STANLEY KNIFE OR SIMILAR BE CAREFULL AND WATCH YOUR FINGERS ONCE THE NOSE IS REMOVED THE HOLE NEEDS CHAMPFERING OUT FROM THE CENTRE OF THE HOLE TO THE EDGE OF THE MANIFOLD TO CREATE A SMOOTH FREE FLOWING FUEL FLOW. IF YOU DONT FEEL LIKE TACKELING THIS SEND IT TO ME WITH £6 AND I WILL REPLACE YOUR ORIGINAL WITH A MODIFIED ONE.



__________________


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

No this is incorrect.

Even race bikes have these 'fins' installed on them. I rememeber on my old 2001 DTR someone had done this 'Mod'. The guy I sold it too went ballistic! (He was a mechanic) Saying how unnecessary it was.

I believe even the YZ has these 'fins' and why would they restrict a race bike?

__________________

Always Originate, Never Pirate!

The Leviathan Project

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard