DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> LOOMS -> dt 125 re problems please help
Post Info TOPIC: dt 125 re problems please help
220 tubz


DTR Respected Member

Status: Offline
Posts: 27
Date:
dt 125 re problems please help
Permalink Closed

hi there i have just put a 2007 engine and wiring loom into my dt everythings wired up all the dash lights up neutral and oil light comes on powervalve also makes that noise, but now when i press the startor button i get nothing it also has no spark when i bridge the startor solenoid it turns over but with no spark any help would be appreciated

Ive put the sidestand down also held brake and clutch lever in kill switch is in correct position still nothing

also before i removed engine and loom from the other bike it was perfect startor so its diffently something i have done wrong

 

cheers lee



__________________
slob


Guru

Status: Offline
Posts: 849
Date:
Permalink Closed

Have you earthed the coil to the frame properly? it's just a small black wire, would cause the no spark.

__________________
220 tubz


DTR Respected Member

Status: Offline
Posts: 27
Date:
Permalink Closed

yes mate also the orange wire is on the spade connector on the coil


__________________
slob


Guru

Status: Offline
Posts: 849
Date:
Permalink Closed

You say you have the sidestand down, do you not mean up lol, it kills the engine when it is down, just incase it isnt a typing error lol.

__________________
Seiki


Admin

Status: Offline
Posts: 2156
Date:
Permalink Closed

moved

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> LOOMS -> dt 125 re problems please help
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard