Hi im looking to replace the indicator and stop/tail bulbs with LED bulbs has anyone done this think i will need a relay replacement due to voltage change on the indicators
Stop tail .. no bother, will work fine & just draw less current ...
Indicators ... I've never done it, but am pretty sure the LED's will come with resistors, which will give you the same overall impedance / resistance... [ac or dc on DT's ?? never thought about it ??] ... as your old bulbs, so your existing flasher relay is fine.
Ask about resistors when you buy LED's, decent set should come with em, built in ??
__________________
Blue - DT 125 RE - '04 - First Of The Leccy Start Lanza'Like Bikes !
Blinners wrote: think i will need a relay replacement due to voltage change on the indicators
Voltage [12] will be same to power your LED's as they are automotive ones ..
The problem is that if the resistance / impedance is much lower, the flasher relay will make em flash like they are on speed ! Will fail MOT & look crap if flash too fast .. {& attract bobbies !} Like on a car, when 1 bulb [lamp] goes, the remaining indicator flashes like hell, as the overall resistance has dropped, current goes up, flasher flashes quicker ..
Capice ?
-- Edited by SimsonS51E at 22:49, 2009-01-25
__________________
Blue - DT 125 RE - '04 - First Of The Leccy Start Lanza'Like Bikes !