all looks fine on the video. you can take exaust off and do it that way,look up the port and see if it moves inside there will be a peice of metal shaped like a banana but flat if that makes sense, everytime you move throttle the pullys it will open and close must have ignition on
-- Edited by DTR125CRAZY on Saturday 5th of September 2009 02:29:44 PM
looks like to me that its not fully opening. can u get a vid up with out engine running and ignition on. the black fork, should be aligned with the hole behind it.
Ignition on, It does the 2 motor passes, then should sit wide open..This is when u slaken the cables off, find a 4mm drill bit and slide it threw the fork ito the hole and leave it there.
Tighten both cables to take up the slack. Get then tight-ish, then turn back half a turn.so that the cabels are not too tight. just right!!
Pull out the 4mm drill bit. now the fork sould be aligned with the hole.
turn your ignition off, then on. test to see if it re-aligns with your set hole.
all set, go riding!
u can clearly see when u rev high, the fork is not aligning with the hole, by a fair bit..
The cables need adjusting..ON first reflection, i thought the PV was operating in the oppisite direction, untill u reved the bike.
thanks for the help.. il try that thing soon satone,
i did take the exhaust off after .. took a video of the ignition turning on and off, on and off, on and off, got the exhaust back on now but could have it off again in 5 min .. got it stripped down cuz cleaning carb :) is it safe to run the engine with the exhaust off?
btw the reason im doing this is because the bike does 50mph in 3rd gear, but WILL not go past 50 no matter what gear, tried all, so im cleaning the carb also might help.
any other advice?
thanks for any ideas
-- Edited by craigbulmer on Sunday 6th of September 2009 06:02:46 PM
mine had the same problem when i first got it, turned out that a mouse had been using the airbox as a home and stored a ton of corn in there and thats why mine wasnt going past 50.
-- Edited by RudiRulez on Sunday 6th of September 2009 06:54:07 PM
lmfao thats so funny, wish mine was like that :/ .. haha popcorn time LOL opened and pulled of everthing today, all panels exhaust front cowling. cant get the tank off tho!!!!!!! does anyone have a technique to get the tank off??? undid the bolt at the bottom of it near the airbox, cant budge it?? i dont really wanna use the handymans technique of hammer it i like the paint job :P
-- Edited by craigbulmer on Sunday 6th of September 2009 10:03:11 PM
I cant believe you made the Mouse homeless, poor mouse, thats deffo a new one for the books, never heard of anything like that before thats so funny!!!
must have ignition on 
