DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> HEAD STOCK -> Head steering bearing
Post Info TOPIC: Head steering bearing
gasto


DTR Respected Member

Status: Offline
Posts: 69
Date:
Head steering bearing
Permalink  
 

Does anybody knows the code for the head bearings for the Tdr 125 belgarda.I assume they are the same with the Dt's one.Thanks.

__________________
dtrdave


DTR Senior Member

Status: Offline
Posts: 145
Date:
Permalink  
 

Had a good look round the net and i can't find the part number for them.They are indeed the same as the 1989-1998 model dt125 though if that's any help.

Best bet is to take them out and get the code directly off the side of the bearing or take them with you to your local bearing company,which will be much cheaper and usually better quality than you'd get at your local bike shop...

HTH
Dave


__________________
gasto


DTR Respected Member

Status: Offline
Posts: 69
Date:
Permalink  
 

Found the dimensions for both the bearings the down is tapered 30x55x17 with code 32006jrrs.The top one has dimensions 25x43x11 and is with simple balls.I looked out for it  in bearing shops and they haven't that dimension.They nearest one is 25x42x11 and told me it's a 'trick' from yamaha so you buy it only from there.

I checked on ebay and found a complete set for 20 pounds but both the bearings are tapered roller.Does anybody know if the top one will strait fit?



__________________
dtrdave


DTR Senior Member

Status: Offline
Posts: 145
Date:
Permalink  
 

gasto wrote:

 

Found the dimensions for both the bearings the down is tapered 30x55x17 with code 32006jrrs.The top one has dimensions 25x43x11 and is with simple balls.I looked out for it  in bearing shops and they haven't that dimension.They nearest one is 25x42x11 and told me it's a 'trick' from yamaha so you buy it only from there.

I checked on ebay and found a complete set for 20 pounds but both the bearings are tapered roller.Does anybody know if the top one will strait fit?

 



Look Here for the bottom bearing

And Here for the top one.

 



__________________
dtrdave


DTR Senior Member

Status: Offline
Posts: 145
Date:
Permalink  
 

gasto wrote:

 

I checked on ebay and found a complete set for 20 pounds but both the bearings are tapered roller.Does anybody know if the top one will strait fit?

 



Yes it will be a straight fit...

Out of curiosity-  where did you find the bearing dimensions? online?



__________________
gasto


DTR Respected Member

Status: Offline
Posts: 69
Date:
Permalink  
 

I checked on the tdr250.co.uk  cause i have remembered that when modify their front end with other the are using the yokes from the dt/tdr125.

Check the link(i think you must be a memeber)

http://tdr250.co.uk/forum/viewtopic.php?f=17&t=3021



__________________
gasto


DTR Respected Member

Status: Offline
Posts: 69
Date:
Permalink  
 

Received today the bearings but the down one doesn't have the seal.Can i found this seal anywhere?What if i don't put it at all?

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> HEAD STOCK -> Head steering bearing
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard