yeah they are double bublb, and i am confused because i have 4 wires just for my main beam wich has only 2 wires on the bulb? i been told to wrap the two yellow wires into one and earth the green? is that right because it dont work haha?
__________________
-Yamaha DT 125 RE 2007
supermoto wheels motocross headlight trailtech vapour stealth full DEP system yz rear guard custom seat powdercoated tank custom levers
a little confused myself reading this, do you mean the four wires on the loom connector block? i believe one is earth then you have live for low beam, live for high beam and live for pilot light, as Ifitdontworkillburnit said thats a good way to wire it as you get get a high/low beam as the halogen lights only have the one filament
i mean the 4 wires on the loom side, and 2 on the bulb side, sorry for the mix up, right so out of my loom i have 2 yellow one black one green, what should i connect the green to?
__________________
-Yamaha DT 125 RE 2007
supermoto wheels motocross headlight trailtech vapour stealth full DEP system yz rear guard custom seat powdercoated tank custom levers
Whichever one you dont use just leave mate. I put the Bulbs on spade connectors and just slotted em straight into the original headlight plug. if you no longer have a plug, just tape up the spare wire and tuck it out way :)
ok as you can see from the pic, can someone tell me what wire goes where, i.e colour there are two top wires coming from a single bulb in the headlight, what colours do i connect to these?
__________________
-Yamaha DT 125 RE 2007
supermoto wheels motocross headlight trailtech vapour stealth full DEP system yz rear guard custom seat powdercoated tank custom levers
Thinking about things properly, im gonna change my advice ever so slightly ( and also re do my light wiring tomorrow!)
right, ignore the yellows, tape em up out the way.
Connect one light to black and green. Connect the other light to the same black, and to the blue/red wire from the sidelight bulb holder.
That way you will control your high/low beam ( 1 or 2 bulbs) just with the right hand side light switch. Sidelight will bring on one bulb. main will bring on both bulbs.
Hello I'm having a great deal of bother getting my dt125re Aftermarket headlights to work.
I have an aftermarket headlight with standard halogen Lights in, I am trying to wire them up so my hi and lo beam work But I don't know what goes where?
I have 2 yellow wires, 2 black wires, 1 brown wire and one green wire I have no clue how to connect them as there are so many wires going to Just 2 connectors on the bulb its self, and ontop of that there's 2 bulbs So its even more confusing what wires go where.
I am waiting to put my bike through its mot and I urgently need My hi and lo beam to work, could anyone tell me what wires need to go where It would be much appreciated, ring or text me rather than replying on here If you don't mind that is just so I can find out asap. 07814466262