DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> Electrics -> Fitting mini indicators dt125r 2002
Post Info TOPIC: Fitting mini indicators dt125r 2002
baz


DTR Member

Status: Offline
Posts: 9
Date:
Fitting mini indicators dt125r 2002
Permalink  
 

Mini indicators DT125R
 
 

Hi, All

I want fit mini indicators on my dt125r will i have to change the flasher relay as well if yes where is it located ! Any advice would be very much appreciated

 

 



__________________
Seiki


Admin

Status: Offline
Posts: 2156
Date:
Permalink  
 

Yes you do or they'll not flash at all or too fast. OEM relay is usually connected to the bracket that holds the headlight on

__________________
the only way is YAMAHA DTR


Guru

Status: Offline
Posts: 1290
Date:
Permalink  
 

only if there LED ones



__________________

 

 
baz


DTR Member

Status: Offline
Posts: 9
Date:
Permalink  
 

Hi, Guys

Getting confused no there not led ones ?



__________________
the only way is YAMAHA DTR


Guru

Status: Offline
Posts: 1290
Date:
Permalink  
 

my mini arrow indicators (bulb) were a straight fit



__________________

 

 
xGINCATx


Guru

Status: Offline
Posts: 607
Date:
Permalink  
 

It will be a straight swap unless they are LED ones

Or you could just remove the indicators completely
By law you don't need them if you have removed your rear pegs..

__________________

Sig
baz


DTR Member

Status: Offline
Posts: 9
Date:
Permalink  
 

Thanks for info



__________________
baz


DTR Member

Status: Offline
Posts: 9
Date:
Fitting mini indicators dt125r 2002 (more info needed)
Permalink  
 

Hi, All

Thanks for previous info, Will i need to cut any wires to connect new mini indicators or will they connect via a spade connector or similar no manual so i need or the advice i can get.



__________________
DangerousDave87


DTR Senior Member

Status: Offline
Posts: 244
Date:
Permalink  
 

if your loom hasn't been cut then they'll connect using bullet connectors and as everyone else has said its a straight swap

__________________

baz


DTR Member

Status: Offline
Posts: 9
Date:
Permalink  
 

Thanks for info,

Yes,  am fitting arrow mini indicators so its great its a straight swap.



__________________
Seiki


Admin

Status: Offline
Posts: 2156
Date:
Permalink  
 

Merged with your other thread, no need for a new one

__________________
xGINCATx


Guru

Status: Offline
Posts: 607
Date:
RE: Fitting mini indicators dt125r 2002
Permalink  
 

baz wrote:

Hi, All

Thanks for previous info, Will i need to cut any wires to connect new mini indicators or will they connect via a spade connector or similar no manual so i need or the advice i can get.

It depends, i bought some mini indicators from Hong Kong for my Kawi and the connections were different sizes.. I managed to make them fit by opening the bullet connection thingy open more..
Risk it for a biscuit I say, if they don't fit it's not exactly a hard job getting them to fit



__________________

Sig
baz


DTR Member

Status: Offline
Posts: 9
Date:
Permalink  
 

true true



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> Electrics -> Fitting mini indicators dt125r 2002
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard