Hey people, Little problem here when riding my bike as it goes 45mph top haha what i know it's ment to do atleast 2 times of that! Cause the people i reccently baught it off made a fat hole in air box & changed the carb settings.. this caused the bike to mess up & flood after 2 mins of ridding stupid.. But the only problem i got now is... As you're sitting on the bike on the right hand side of the carb, Should there be a mixture screw as there's a fredded hole open but looks like it's been blaked off... I've changed the settings back to normal on one side & blocked this stupid hole on the side of the air box what they cut out.. it sounds a little less wobby but needs to be sorted. Cheers guys!!
No that hole is supposed to be blocked off with no screw in it. My carb was the same and one with a mashed up pilot screw I took off it was too. The only adjustable things are on the left, idle speed screw, pilot screw and choke. Is it still only doing 45 top speed?
__________________
Is that bits of piston ring firing out your tailpipe?
You might want to post a video of the bike running and revving and take the cover off the oil pump so you can check that the cables are pulling all the way.
__________________
Is that bits of piston ring firing out your tailpipe?
The engine is running sweet, No piston ring chippins comming out of the can or no gritty metals comming out of the oil drane. & thank you kalamity kid for letting me know about the screw as that's my main concern, cheers!! The only thing that i really need to look into is taking the airbox off & carb, clean up carb & sort out that massive hole in the airbox haha also change settings should be ok right? cheers!
__________________
So longgg gay boys....
Page 1 of 1 sorted by
DT125R Forum -> Tuning -> Hey people, problem with carb... Am i missing another mixing screw on the right handside? More info here!
