DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> Videos -> Barron89 and his 30MPH top speed DT.
Post Info TOPIC: Barron89 and his 30MPH top speed DT.
Energized


DTR Legend

Status: Offline
Posts: 1853
Date:
RE: Barron89 and his 30MPH top speed DT.
Permalink  
 

I'd agree with you aswell Funkey +1 p.s always use a genuine head gazzie guys!



__________________

 
Barron89


DTR Respected Member

Status: Offline
Posts: 53
Date:
Permalink  
 

Thanks again everyone! I have ordered some carbon fibre reeds hopefully that should sort it. Will have a good inspection of everything at the same time. I just noticed a tight small split on the rubbery plastic bottle joint to the right side of the carb could that affect the performance?



__________________
GADGET


Guru

Status: Offline
Posts: 1332
Date:
Permalink  
 

Yup,and kill it,while your changing the head put a new piston in it ,sorted

__________________
Barron89


DTR Respected Member

Status: Offline
Posts: 53
Date:
Permalink  
 

here are some pics. so the when you talk about the swapping the 3bn head over does that mean i have to change the cylinder too or can you literally just swap the head?



Attachments
__________________
Energized


DTR Legend

Status: Offline
Posts: 1853
Date:
Permalink  
 

no lol you can just swap the head over while the heads off check everything is fine in the top end and use a genuine head gasket when you put it all back.



__________________

 
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

He's got the 3MB head if I remember correctly, same as my head at least. Which is a 3MB

__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
Barron89


DTR Respected Member

Status: Offline
Posts: 53
Date:
Permalink  
 

no i think its a 3bn. it says it on the close up photo of the top of the crank case



__________________
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

That's stamped on the crankcase though, it's a possibility that the head and bore have been changed no?


__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
Barron89


DTR Respected Member

Status: Offline
Posts: 53
Date:
Permalink  
 

No checked this morn. It's. 3bn. I asked Deetee mx if he had a mb and he said he doesn't think theres a problem with the 3bn's

__________________
the only way is YAMAHA DTR


Guru

Status: Offline
Posts: 1290
Date:
Permalink  
 

dont worry about the model of the head, not the cause of the problem

I  have sold 3 3mb head so they must be better



__________________

 

 
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

I didn't think it would be a problem either, just that if he needed to change some parts over then I have the same head/engine and would lend him anything he needs as he's a dude and giving me a caliper carrier :D

__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
Cameron


Guru

Status: Offline
Posts: 542
Date:
Permalink  
 

Sounds a bit like mine when I got this dep exhaust, just wouldn't rev past 7k or something. 1kg of caustic soda did the trick lol.

__________________
Barron89


DTR Respected Member

Status: Offline
Posts: 53
Date:
Permalink  
 

What! Ha ha you can't be serious? How does that work exactly?

__________________
eG x LoGiKzZ


Guru

Status: Offline
Posts: 767
Date:
Permalink  
 

it removes all/most of the carbon build up inside the exhaust, desperately need to do it on my 2 exhausts

__________________
«First  <  1 2 | Page of 2  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> Videos -> Barron89 and his 30MPH top speed DT.
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard