DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> LEVERS -> help on these CNC levers
Post Info TOPIC: help on these CNC levers
DTR_NW


DTR Senior Member

Status: Offline
Posts: 141
Date:
help on these CNC levers
Permalink  
 

hi spotted these on ebay

http://www.ebay.co.uk/itm/Tit-Standard-CNC-Brake-Clutch-Levers-YAMAHA-YZF-R6-R1-99-00-01-02-03-/200733636906?pt=UK_Motorcycle_Parts&hash=item2ebca8392a

 

would it be possible to purchase the part that clamps to the bars then fit these ???

as the normal levers on a dtr are rubbish any ideas guys thanks



__________________

2003 DTR Soon to be SUPERMOTO "IF YOUR NOT FAST YOUR LAST"

My DTR from start to finish

http://dt125r.activeboard.com/t49728429/03-dtr-partial-rebuild/?page=last
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

I'm sure the clutch lever wouldn't be hard to fit, it's the front brake that might be a problem. As the standard lever would be setup for double disc on some bikes?

__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
DTR_NW


DTR Senior Member

Status: Offline
Posts: 141
Date:
Permalink  
 

ahh right just sick of having cheapo boring clutch and brake levers cant find anything worth putting on that isnt like £100 +

__________________

2003 DTR Soon to be SUPERMOTO "IF YOUR NOT FAST YOUR LAST"

My DTR from start to finish

http://dt125r.activeboard.com/t49728429/03-dtr-partial-rebuild/?page=last
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

What I tend to do when looking for decent levers is find a perch for a YZ, or something along those lines as they do decent enough levers for that kinda bike. Just look on ebay for a YZ brake assembly or clutch assembly and buy that, then you can have whatever levers that are available to the YZ. I mean don't get me wrong, the clutch one that you're looking at would fit, but the front brake would be a pain to find a decent cheap assembly that isn't for twin disc setup.

__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
DTR_NW


DTR Senior Member

Status: Offline
Posts: 141
Date:
Permalink  
 

http://www.ebay.co.uk/itm/Yamaha-YZ125-250-01-07-RFX-Trick-Brake-Clutch-Levers-/140764121235?pt=UK_Motorcycle_Parts&hash=item20c6320893

that looks similar for the brake

__________________

2003 DTR Soon to be SUPERMOTO "IF YOUR NOT FAST YOUR LAST"

My DTR from start to finish

http://dt125r.activeboard.com/t49728429/03-dtr-partial-rebuild/?page=last
NEV


Guru

Status: Offline
Posts: 2515
Date:
Permalink  
 

Have a look at the Brembo front brake levers, that are standard on the Italian Yamaha imports and Ducattis, there's two types, one has the rectangular reservoir, the other has the plastic bottle reservoir bit like the rear master cylinder , I have the Brembo rectangular one on at the min, using a brake pressure switch instead of the banjo bolt, I've also got the other type with the plastic bottle reservoir with a nice green annodised lid too, but needs a master cylinder repair kit, having trouble finding the repair kit at the minute mind, I think it was off a 916s Ducatti, but big difference on the brakes, compared to the standard Yam one.

__________________

 
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

Bargain if it goes for chips..

http://www.ebay.co.uk/itm/Brembo-Radial-Brake-Master-Cylinder-19mm-Bore-X-20-Ratio-Standard-Lever-/110913182527?pt=UK_Motorcycle_Parts&hash=item19d2f0db3f#ht_500wt_1202

__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
NEV


Guru

Status: Offline
Posts: 2515
Date:
Permalink  
 

That is cheap that, 6 days left mind

__________________

 
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

It'll probably fetch around 60 I should think. Everyones got the same idea and want it for peanuts so.

Or this one..

http://www.ebay.co.uk/itm/DUCATI-620-IE-600-750-900-MONSTER-BREMBO-FRONT-BRAKE-LEVER-MASTER-CYLINDER-/170866899924?pt=UK_Motorcycle_Parts&hash=item27c875fbd4#ht_1017wt_952

__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
NEV


Guru

Status: Offline
Posts: 2515
Date:
Permalink  
 

CarlosRexx wrote:

It'll probably fetch around 60 I should think. Everyones got the same idea and want it for peanuts so.

Or this one..

http://www.ebay.co.uk/itm/DUCATI-620-IE-600-750-900-MONSTER-BREMBO-FRONT-BRAKE-LEVER-MASTER-CYLINDER-/170866899924?pt=UK_Motorcycle_Parts&hash=item27c875fbd4#ht_1017wt_952

 Aye thats same as I have on mine at the min, the other is like the one I have that takes the plastic reservoir, but needs a repair kit as the seals shot it.



__________________

 
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

Would you consider selling the one you have? I'm a pro at ebay and internet trawling and could find a seal kit and have myself a laaaaavly little front brake there! haha

__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
NEV


Guru

Status: Offline
Posts: 2515
Date:
Permalink  
 

Aye could possibly sell on after sorting the other out, if you're desperate for it like, although was thinking of sumoing the XT and banging it on there.

__________________

 
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

NEV wrote:

Aye could possibly sell on after sorting the other out, if you're desperate for it like, although was thinking of sumoing the XT and banging it on there.

 Not really desperate, I think I've found a few ways of having cool levers on the bike. But It would be cool for people to notice a Ducati brake assembly on a DT. ;) Haha, keep it bud and whack it on the XT :)



__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
NEV


Guru

Status: Offline
Posts: 2515
Date:
Permalink  
 

Fair nuff, ya know where it is just incase you come across a Brembo caliper + disc needing it

__________________

 
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

Yeah, cheers :)

__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> LEVERS -> help on these CNC levers
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard