DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> POWERVALVES -> Powervalve machining after re bore.
Post Info TOPIC: Powervalve machining after re bore.
AndyYam


Guru

Status: Offline
Posts: 1017
Date:
Powervalve machining after re bore.
Permalink  
 

Has anyone had an experience with bringing back the powervalve afer a rebore. I was skeptical at first but it appears you do have to do work on the valve to stop it rubbing on the piston after a rebore or two. Does anyone know how much need to be taken off or had any general experience with this?



__________________
fused420


DTR Senior Member

Status: Offline
Posts: 372
Date:
Permalink  
 

http://dt125r.activeboard.com/t34662185/pvalve-fail/

__________________

1999 Honda Hornet 600 - Current

1998 Yamaha DT 125 R - SOLD
coastie123


DTR Senior Member

Status: Offline
Posts: 391
Date:
Permalink  
 

Give Norfe a shout and look through his posts, he wrote up how to do it and there's pictures..

__________________

Blue DT Project Thread - OLD

Black DT Project Thread - NEW!!!
Cameron


Guru

Status: Offline
Posts: 542
Date:
Permalink  
 

Just take a bit off the side that comes in contact with the piston. If you put half of the valve in the cylinder it's easier to get an idea of what needs taking off and how much. I was surprised how little clearance there was tbh.

__________________
NEV


Guru

Status: Offline
Posts: 2515
Date:
Permalink  
 

even less as the piston expands.

__________________

 
AndyYam


Guru

Status: Offline
Posts: 1017
Date:
Permalink  
 

Cheers guys had a look at that thread and replied on there.

__________________
NORFE


DTR Trusted Engine Builder

Status: Offline
Posts: 1723
Date:
Permalink  
 

http://dt125r.activeboard.com/t47212329/power-valve-modification-for-over-sized-bores/



__________________
dread123


Moderator

Status: Offline
Posts: 940
Date:
Permalink  
 

thanks pal

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> POWERVALVES -> Powervalve machining after re bore.
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard