DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> FORKS -> whats needed to fit YZ 125 forks
Post Info TOPIC: whats needed to fit YZ 125 forks
DTR_NW


DTR Senior Member

Status: Offline
Posts: 141
Date:
whats needed to fit YZ 125 forks
Permalink  
 

can anyone tell me exactly whats needed to fit YZ 125 forks to a 2003 DTR

 

been offerd a full yz 125 so thinking of swapping engine and forks into my DTR ??



__________________

2003 DTR Soon to be SUPERMOTO "IF YOUR NOT FAST YOUR LAST"

My DTR from start to finish

http://dt125r.activeboard.com/t49728429/03-dtr-partial-rebuild/?page=last
Seanyftw


Guru

Status: Offline
Posts: 928
Date:
Permalink  
 

Why would you swap the engine over? that's retarded lol

__________________

Sig.jpg  gHnbADQ.gif  401587_10152319640490591_758222196_n.jpg

       Then                                                                                                                             Now
MDK


DTR Legend

Status: Offline
Posts: 1690
Date:
Permalink  
 

yz eng in a road bike ...hmmm gona hit the pocket there milage=rebuilds

__________________

DTR125CO-1.jpg


de restrictions

good clean up of a old batterd  dtr  95

 
DTR_NW


DTR Senior Member

Status: Offline
Posts: 141
Date:
Permalink  
 

Sorry its a yz250 not 125

__________________

2003 DTR Soon to be SUPERMOTO "IF YOUR NOT FAST YOUR LAST"

My DTR from start to finish

http://dt125r.activeboard.com/t49728429/03-dtr-partial-rebuild/?page=last
NORFE


DTR Trusted Engine Builder

Status: Offline
Posts: 1723
Date:
Permalink  
 

dont put the engine in unles ur ritch lol, been there done that and there no gud for road use

forks are easy

bearingg and stem mods



__________________
DTR_NW


DTR Senior Member

Status: Offline
Posts: 141
Date:
Permalink  
 

how do u mod the bearings or stem ?

__________________

2003 DTR Soon to be SUPERMOTO "IF YOUR NOT FAST YOUR LAST"

My DTR from start to finish

http://dt125r.activeboard.com/t49728429/03-dtr-partial-rebuild/?page=last
NORFE


DTR Trusted Engine Builder

Status: Offline
Posts: 1723
Date:
Permalink  
 

U PUT a bigger id bearing in it an grind the stem to fit thru the top bearing like i did  as the stem had a bulb shape to it and is 10mm wider an inch or 2 down from the top



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> FORKS -> whats needed to fit YZ 125 forks
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard