DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: What's missing


Guru

Status: Offline
Posts: 690
Date:
What's missing
Permalink  
 


Got these forks out to clean ready to put on the yokes just got but noticed loads of empty bolt holes so I'm gutted any body no what goes in these holes info will be much appreciated cheers

__________________



Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Ok just found out what most of them are for just got to figure out wat goes on the 4 holes


__________________



Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

And 1 more thing would I need a yz wheel spindle and will the dt wheel fit it

__________________



Guru

Status: Offline
Posts: 802
Date:
Permalink  
 

not seen the 4 holes before? lol defo need the yz spindle hmm to fit the dt wheel you'll need to change the bearings to suit the bigger yz spindle.... possibly need different spacers too... ps your a lucky bleeder lol i missed out on bidding for those yokes! 99p they went for didn't they?



__________________

money killed everything....



Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Yeah 99p thought I might as well so still got far to go on these then. got this spindle ses it got spacer with it to just hope it fits just need bearings then to find sum 1 to modify my yoke for the dt

__________________



Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Are these the right bearings


__________________



Guru

Status: Offline
Posts: 802
Date:
Permalink  
 

have you got digital calipers? you need to measure the spindle for inside diameter,the wheel for the outer diameter and the dt bearings for the width... then order them off simply bearings biggrin 



__________________

money killed everything....



Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

Mate before you modify your yokes wait until I've done mine. Apparently my way could be better!

__________________

Always Originate, Never Pirate!

The Leviathan Project



Guru

Status: Offline
Posts: 802
Date:
Permalink  
 

+1 much better idea....



__________________

money killed everything....



Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

Thanks

Like I said currently my engineer is making up all the parts. But Wemoto have sent me the wrong taper bearings. After them not arriving to start with 10 days later I complain. 4 days later They sent out a new one. AND IT's THE WRONG FÚCKING BEARING! Unbelievable.

__________________

Always Originate, Never Pirate!

The Leviathan Project



Guru

Status: Offline
Posts: 802
Date:
Permalink  
 

mate!

i ordered my bearing. put it in my shed. came to do the conversion. couldn't find the fecking bearing..... tore the shed inside out,i mean all of it outside on the lawn. never did find the fecking thing confuse 



__________________

money killed everything....



Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

What USD's have you got?

__________________

Always Originate, Never Pirate!

The Leviathan Project



Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Ok we'll I think il wait till u do urs coz I orderd the rong spindal anyway so plenty of time and might of got the yoke wrong aswell forks from 1993 apparently and yokes 2004 what u think

__________________



DTR Legend

Status: Offline
Posts: 3132
Date:
Permalink  
 

woooooh should of called me erlyer mate.

these look like 1991/2 yz 125/250 forks looks identical to mine a dt spindle fits as they are the same spindle form the dt also used is some older xt 500's if i remember correctly, i have np;ted a 21 inch dt 125 wheel but with no spacers but my supermoto wheels fit init but the calliper mount is wrong. init but the yz wheel in my forks look the same as the dt wheel even the disk bolts have that same 2by2by2 pattern.

that 4 holes you bolt this plate into it your sopost to run the brake line throw it then up the front of the protectors.
















__________________
Dont Blame The Player Blame The Game


Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Cheers solider do u no if my 2004 yokes will fit the forks I got or will I need 1990s yoke

__________________



DTR Legend

Status: Offline
Posts: 3132
Date:
Permalink  
 

not to sure you would have test them but i have a second set of 1990s yokes i am most likely going to sell at some point

__________________
Dont Blame The Player Blame The Game


Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Ok sounds good I have to wait till next week to find out if they fit and I need forks serviced as well bit bouncy probably not cost affective but fuk it they look to good not to

__________________



DTR Legend

Status: Offline
Posts: 3132
Date:
Permalink  
 

im going to be changing the oil and seals in my and well building one good set from 2 pairs lol but im going to a place called omc up london you basicaly rend a bench and tool's and do it yourself so i can learn how to do it without geting charged £40 a fork from some rip off shop

__________________
Dont Blame The Player Blame The Game


Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Yeah that sounds like a good idea I want to do it my self but don't no where to start to be honest so I'm probably gona be that smuck payin 40 each

__________________



Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Fukin things don't fit together so got sum yz forks and yz yokes and they don't fit together noooooooooooooo what a waste ill have to give it another go getting forks or yoke oh well





__________________



DTR Legend

Status: Offline
Posts: 3132
Date:
Permalink  
 

you wanna sell them forks then? both my pairs are pritty shagged and want some decent ones for the lanza

__________________
Dont Blame The Player Blame The Game


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

It's that or you make up a collar for it to fit.

Either way it's a bummer :\

__________________

Always Originate, Never Pirate!

The Leviathan Project



Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Big bummer Na not gona sell em till I got a set just need to go to Yamaha an find out what I got and what I need

__________________



Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Toy u said earlier in this thread that u got sum old yokes how much u want for them

__________________



DTR Legend

Status: Offline
Posts: 3132
Date:
Permalink  
 

you ahve a set of what looks like 1989-93 yz 125/250 forks and the yokes i have no idea mate

__________________
Dont Blame The Player Blame The Game


Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Can u mesure the top and bottom holes of the yoke and give me a price please mate

__________________



Guru

Status: Offline
Posts: 802
Date:
Permalink  
 

are they not 2003 onwards yokes? think bradders needs a set that size,and he has the set of yokes you need? worth a quick ask/swap. fair exchange is no robbery and all that



__________________

money killed everything....



Guru

Status: Offline
Posts: 690
Date:
Permalink  
 

Yeah cheers monkey just sent him a message

__________________

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard