DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> Top End -> Thermostat problems
Post Info TOPIC: Thermostat problems
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Thermostat problems
Permalink  
 

So, on both my bikes now the thermostat has failed and caused the bike to run unusually hot. The pin that guides the inside comes out and gets stuck so the thermosat either cant open or gets jammed. It's pissing me off. I've just had the rebuild done and put in the bike but didn't wanna run it without a thermostat.

 

why would it be doing it? Especially to happen twice.. Is it a common problem?



-- Edited by CarlosRexx on Saturday 9th of February 2013 02:18:20 PM

__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
GADGET


Guru

Status: Offline
Posts: 1332
Date:
Permalink  
 

Run it without till you can get a genuine one ,it will just run cooler for now, are you bleeding the coolant when you put it back in ????

 



__________________
CarlosRexx


Guru

Status: Offline
Posts: 1066
Date:
Permalink  
 

I've taken it out for now. Nah I haven't, I fill it up, run it and then leave the cap off and let it bleed?

__________________

If you're not fast, you're last

TINNNNGGG TA TA TINGGGG.
NORFE


DTR Trusted Engine Builder

Status: Offline
Posts: 1723
Date:
Permalink  
 

just take the thermostat out and chuk it over yur shoulder.....

refit the housing and ride the bike....

just make sure u give the bike a good stedy warm up when ever you ride it

all the thermosat does is close off the coolant system at the head....opens when it gets warm then lets the coolant circulate the whole circit



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> Top End -> Thermostat problems
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard