DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> General Chat -> after market parts for dt125
Post Info TOPIC: after market parts for dt125
DT-R_bradders


Guru

Status: Offline
Posts: 2165
Date:
RE: after market parts for dt125
Permalink  
 

nev m8y what the differance between these other than the obvious different shapes but the descriptions are thesame for both?? which ones which? and how thick are these?

i could easily make these but the drawing for the second one is gonna have to be more in depth. the top left hole will be my X Y 0 datum/start position. but the hole to the top right.. i work on polar radius and polar angle to tell the machine where the hole needs to be drilled. on that drawin the hole has a radius of 45mm thts the distance from the first one (XY0) but ill need to know the angle. 0deg is straight line in x+ to the right. x-to the left would be 180deg straight up in y- would be 90deg ect so a rought guess goin by the pic id say its about 25-30 deg polar angle. ill need to know the exact angle of it to get it spot on. same goes for the bottom right hole. remember i wont have any means of trial fitting these brackets

__________________

             

 
ToySoldier


DTR Legend

Status: Offline
Posts: 3132
Date:
Permalink  
 

brad the top one is dtr single caliper with standard dtr forks but with dtx sm wheel second is dtx caliper and dtx wheel on dtr forks

__________________
Dont Blame The Player Blame The Game
DT-R_bradders


Guru

Status: Offline
Posts: 2165
Date:
Permalink  
 

ite kl i get ya now cheers m8



__________________

             

 
DT-R_bradders


Guru

Status: Offline
Posts: 2165
Date:
Permalink  
 

lol nevwin ill draw pics tomoz at work n post them up easier to describe in pics than words lol

__________________

             

 
DT-R_bradders


Guru

Status: Offline
Posts: 2165
Date:
Permalink  
 

ok iv made a start on the pv covers today stayed late at work on done this so far took like 2 hours just for that lol hard to work out the start and finish positions of the outer radius cut but getting there ; ) i hope you ****ers still want these!  lol

 

 

 

 

 



__________________

             

 
Nathlaad


DTR Legend

Status: Offline
Posts: 3766
Date:
Permalink  
 

dont want one

__________________

K6 DRZ 400sm
SUPERSTEVE


Guru

Status: Offline
Posts: 686
Date:
Permalink  
 

Looking good, are you gonna engrave them?

How much these gonna be?

__________________

POLISHED STUBBY DEP PIPE FTW

MY 'BAD BOY' BUILD 
Ralzy


Guru

Status: Offline
Posts: 853
Date:
Permalink  
 

Looking forward to seeing the end results Braddersbiggrinbiggrin



__________________

 

 
DT-R_bradders


Guru

Status: Offline
Posts: 2165
Date:
Permalink  
 

nath u slag ur buying ten!

dunno to both questions steve lol ill get it finished first n ill av a bash a programming the engraving bit. cost wise not sure i woulda thought 10-15 quid? sounds reasonable itll be annodisedin a few colours aswell

__________________

             

 
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

If you got those powervalve covers finished to a nice standard with YPVS engraved into them then I would pay quite a bit. It's what I've always wanted. the more you can sell the cheaper you can get them for. Personally I would want them to match then end colour. But I'm sure I could spray it myself.



__________________

Always Originate, Never Pirate!

The Leviathan Project
DT-R_bradders


Guru

Status: Offline
Posts: 2165
Date:
Permalink  
 

aye can get annodised any colour callum, red, blue, gold, black could prob get purple n green aswell if anywon wanted?
if i docengrave them ill do it after theve been annodised so it shows up in a shiney sliver. im gonna run a 45º face mill round the top to put a chamfered edge on it. could do that after annodising aswell to put a shiney band on the front? ill try a few different ways n get some more pics up

__________________

             

 
Liam12


DTR Legend

Status: Offline
Posts: 1596
Date:
Permalink  
 

I want a red one!!

__________________

FASTER FASTER UNTIL THE THRILL OF SPEED OVERCOMES THE FEAR OF DEATH
SUPERSTEVE


Guru

Status: Offline
Posts: 686
Date:
Permalink  
 

Lime green for me pal!

__________________

POLISHED STUBBY DEP PIPE FTW

MY 'BAD BOY' BUILD 
Nathlaad


DTR Legend

Status: Offline
Posts: 3766
Date:
Permalink  
 

Steve wants my D, he liked my picture and everything, defo wants me

__________________

K6 DRZ 400sm
SUPERSTEVE


Guru

Status: Offline
Posts: 686
Date:
Permalink  
 

Weirdo

__________________

POLISHED STUBBY DEP PIPE FTW

MY 'BAD BOY' BUILD 
Energized


DTR Legend

Status: Offline
Posts: 1853
Date:
Permalink  
 

Lmao! I'll have a red'un mate :D



__________________

 
Nathlaad


DTR Legend

Status: Offline
Posts: 3766
Date:
Permalink  
 

Defo wants it

__________________

K6 DRZ 400sm
FunkeyMunkeyDavid


Guru

Status: Offline
Posts: 802
Date:
Permalink  
 

blue and a purple for me bud wink



__________________

money killed everything....
Ralzy


Guru

Status: Offline
Posts: 853
Date:
Permalink  
 

red for me plz Bradders matey smile



__________________

 

 
SmithYSM


DTR Newbie

Status: Offline
Posts: 1
Date:
Permalink  
 

What about a skid plate for the bottom on the frame/engine... Gotta be a cool looking 1 maybe with a inprint.?

__________________
SUPERMOTO
DT-R_bradders


Guru

Status: Offline
Posts: 2165
Date:
Permalink  
 

ite kl glad to see theres still interest! lol had another bash at it today didnt have long tho, the outer shape is the hardest bit once tht is done the rest is easy, coz im not goin by a proper cad drawing or anything its a bit of a mission its all programmed straight out my head lol
i wont take orders just yet ill get prototypes made then ill start a new thread in for sale section ill sticky it up n close it then urll av to either pm me or phone me up on the works number to order and pay. ill see

smithYSM wont be doin bash plates m8 we dont have anything to do with sheet metal stuff only billet/bar milling and turning, soz m8

__________________

             

 
stillbroke


Guru

Status: Offline
Posts: 668
Date:
Permalink  
 

nice work mate

__________________

getting there .....
DT-R_bradders


Guru

Status: Offline
Posts: 2165
Date:
Permalink  
 

stillbroke wrote:

nice work mate

 cheers m8y



__________________

             

 
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

Shame you didn't finish these mate :(

__________________

Always Originate, Never Pirate!

The Leviathan Project
«First  <  1 2 3 4 | Page of 4  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> General Chat -> after market parts for dt125
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard