I'm thinking this is a carb problem, I bought the new DEP expansion chamber for my dt 125r 2002 (i have rear can also) with standard expansion acceleration was good, now with DEP EXPANSION CHAMBER, theres a flat spot, then all of a sudden it jumps to higher revs and goes, im thinking do i need to adjust the needle height , i went to yamaha dealer and they said it makes a big difference if you adjust it, are they correct? also ive been told by alot of people stay standard jetting (240) ANY HELP WILL BE APPRECIATED!! cheers
__________________
''Regular maintenance is the key to reliability; irregular maintenance is the key to great exercise''
My yamaha dtre with 210 main jet as standard. And dep themselves sId leave it standard. But i derestricted it so put everything back to how it is suppose to be. 240 main jet.
so, im now going for the 250 and 260 jet, going to try the 260 first, then check the plug, if it's too rich, going to put the 250 jet in, fingers crossed that will sort it out..
__________________
''Regular maintenance is the key to reliability; irregular maintenance is the key to great exercise''