hi my bike was running fine came to it at begging of the week and know spark also the servos not cycling been on it for a week now doing my head in and making me wallet a bit light any help be good ta lol
lights fine horn fine fuse fine just power valve not cycling and no spark gunna take loom off tomoz and check for broken wires or sumet but what a head ach it is lol
check your ignition barrel and also engine stop switch. i had same problems- renewed my barrel and working fine. bypass the ignition and try- also pull apart plug for sop switch and bridge it together
good points about ignition and kill switch but they would only affect the spark is strange that the servo is not cycleing and no spark that both may lead to cdi or a wire to and from the cdi ? but bypassing or wireing the bike up maybe a option to try first sure some one can pm you how to wire it up with out ignition..pls dont post how to ...
The kill switch wont stop the powervalve from cycling for definite, your also getting power in and out from your ignition switch because the lights etc are working so thats probably fine. It sounds like a cdi problem if you have lost ypvs operation and spark at the same time as the ypvs controller is built into the cdi.
Tryed wiring my 3rm cdi and loom and started straight away any way to adapt my loom for the engine as need to figure out the generator and light from my stator