DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> CHAINS & SPROCKETS -> Spacing out sprockets
Post Info TOPIC: Spacing out sprockets
dan28


DTR Senior Member

Status: Offline
Posts: 124
Date:
Spacing out sprockets
Permalink  
 

Is it possible to space out both sprockets about 3 mm

i guess I could put some washers begins the rear not sure about tge front though maybe make a spacer from a old sprocket an get some machined off it 



__________________
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

I spaced the rear out.

The front already has a spacer in therr. Although I would leave it alone

__________________

Always Originate, Never Pirate!

The Leviathan Project
dan28


DTR Senior Member

Status: Offline
Posts: 124
Date:
Permalink  
 

I need both move both of then out by approx 3 mm as the chain is too close the tyre
Have a look in my thread in the other bikes section

Cal how come you only moved your rear sprocket was the wheel not spaced quite right

__________________
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

Because I machined down the rear brake carrier to get the rear wheel inline with the front. So the rear sprocket just needed to be pushed out a little bit.

__________________

Always Originate, Never Pirate!

The Leviathan Project
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> CHAINS & SPROCKETS -> Spacing out sprockets
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard