DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Wheel bairings?


DTR Respected Member

Status: Offline
Posts: 95
Date:
Wheel bairings?
Permalink  
 


Went to the Wirral Egg run today wich is going through towns with over 8000 other bikes and thousands of spectaters to raise money and ****, Drove about 20miles fine then stopped off for a quick brew and cool down and soon as i set off my Wheel bairings collapsed so i couldnt go to the Egg run.

Does anyone elses Bairings just suddenly collapse?

I would of done the run but it was wobbling bad and making loud metal to metal screeching blehfurious

__________________


DTR Senior Member

Status: Offline
Posts: 284
Date:
Permalink  
 

Which wheel? Is the bearing spacer that fits between them fitted?

__________________


DTR Respected Member

Status: Offline
Posts: 95
Date:
Permalink  
 

Rear wheel, everythink is there both spacers on either side.

__________________


DTR Senior Member

Status: Offline
Posts: 284
Date:
Permalink  
 

No i mean the spacer that fits inside the hub in between the wheel bearings.If this isn't there then the bearings will collapse

__________________


DTR Respected Member

Status: Offline
Posts: 95
Date:
Permalink  
 

Theres like a tube inside the Hub and 2 washers that where hard to get off that covered the Bearings

__________________


Admin

Status: Offline
Posts: 2156
Date:
Permalink  
 

sounds like all the bits are in the right place they must have been real buggered to collapse m8 there easy to replace and pretty cheap just throw in a new set and it should be fine unless its ground into your wheel

where are you based jon the egg run is just down the road from me i was gonna go but due to things going tits up i couldent make it i was gutted

__________________


DTR Respected Member

Status: Offline
Posts: 95
Date:
Permalink  
 

Ormskirk, I had to go through liverpool and into the tunnel.

__________________


DTR Respected Member

Status: Offline
Posts: 95
Date:
Permalink  
 

My bike was Fine and got to the B&Q carpark just after the Tunnel. As we set out down the dual carradgeway and around the roundabout my back end went really wobbly. I had my bike on a Dyno on Saturday, got 16.9hp with a loose chain and stock exhaust

__________________


DTR Senior Member

Status: Offline
Posts: 141
Date:
Permalink  
 

i just tried taking my wheel bearing out i got new ones the middle collapsed so i was left with the outer metal rim stuck in the hub how did u guys get this out ?

__________________

2003 DTR Soon to be SUPERMOTO "IF YOUR NOT FAST YOUR LAST"

My DTR from start to finish

http://dt125r.activeboard.com/t49728429/03-dtr-partial-rebuild/?page=last

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard