DT125R ARCHIVE

hello to all

thought id help anyone who may be wanting to change their jets at any point

first take carb out of bike by undoing the 2 jubilee clips(1 either side)
1 attaches the carb to the airbox,the other to the inlet rubber where the reeds are

now the carb is free

unscrew the 2 screws on the top of carb(if these sheer they easily come off with mould grips then replace the screws after

now that you have the carb easy to get to

unscrew the 3 bolts on the bottom of the carb
the jet is located inside the lower bowl

be careful not to damage the float bowls(2 black plastic floats) also be careful not to bend the lever they sit on (see pic)

basically what you need to do now is remove the plastic cap from the middle of the carb(see pic)

this will now reveal your jet

unscrew this anti clockwise as you would a normal bolt but be careful as it is made of copper and is easy damaged

reason being that it is made of copper is that if it gets stuck it can be drilled out without damaging the carb

while every thing is off give your carb a really good spray of carb cleaner

this will prevent any blockages

put your new jet in and reassemble

pics too

-- Edited by DTR125CRAZY on Friday 16th of October 2009 11:54:09 PM