DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> Projects -> TDR 125 WHEELS ON A DT125RE
Post Info TOPIC: TDR 125 WHEELS ON A DT125RE
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
RE: TDR 125 WHEELS ON A DT125RE
Permalink  
 

have you got a link for the site mate?biggrin

__________________

{cams,valves,headaches }
....


Guru

Status: Offline
Posts: 665
Date:
Permalink  
 

http://www.ccmriders.co.uk/

__________________
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 



put the engine in the bike all the mounts are finesmile



but theres a few bits im not to sure of

theres two thin water pipes going in to the cylinder head

(one goes into the side of where the thermostat housing is)

and i dont know where they are suposed to lead to???....

im gonna try get some pics tomorow 

if anyone can help it would be greatbiggrin

also does anyone know where i could get a wireing diagram for the tzr??....


cheers for the link crazy ill av a butch now thumbsup.gif


__________________

{cams,valves,headaches }
ben350


Guru

Status: Offline
Posts: 418
Date:
Permalink  
 

They go to the carb heater pipes - most people leave them off unless you are using the bike regularly in this freezing weather.

__________________

Aprilia Tuono 1000 + Honda Civic 1.6 VTi
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 

ben350 wrote:

They go to the carb heater pipes - most people leave them off unless you are using the bike regularly in this freezing weather.



 



cheers mate

__________________

{cams,valves,headaches }
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 

a couple flix to keep everyone posted:



Attachments
__________________

{cams,valves,headaches }
Benneyboy


DTR Respected Member

Status: Offline
Posts: 72
Date:
Permalink  
 

fmanfman09 wrote:

 

hi everyone .

havent been on the site much recently holiday season n all that,

also been mucking around with the new toy a CCM 644 fecking

beast !

but yeah started doing a few bits to the dt

removed the old engine, and found a problem strate away

wich was what benney boy was talking about .The hole where

big pin goes through the chassis,swing arm and engine was

made smaller by some ****ty little metal and rubber bush thing.

so i got the blowtorch on it and tapped it out.

and id like to point out to bennyboy im prety sure my engine has got
cylinder with mounts so should be cool there hopefullysmile.gif


as for the carb and manifold thanks for the advice m8 but im goin

to just use the 28 for the time being.


and ben350

iv already got my wheels mate but fanx anyways.


 

 


 

 

Hi mate not trying to start a forum war buts thats deffo not a 4dl bottom end , thats a 4fl the 4dl as previoley metniond uses the 2 rear indenpendent mounts where as the 4fl uses the swing arm piviot buddy glad its gone in though bud and plase dont think im trying to be a prick lol , also can you take your pics the right way lol

 

 



__________________

my bikes aprillia af1 125 (striped down  project ) , honda mt 50 : h100 engine rebuilt all by me along with the crank !, supermoto wheels , motorhispna swing arm , usds forks , geneli pipe , more stuff planned looking to get another dtr soon though !
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 

im not at all sure wether its a 4dl or 4fl

on the loom it says 4dl
and on the bottom.

all i know is it fits now,

so onto the next problem the electrics i fcuking hate messing about with wiring such a pain in the ass.

i roughly connected up the loom put all the connectors i could match up to where they go. and i think all i need is a cdi + ignition.

cant be sure thoconfuse.gif

does anyone know where i can get a wiring diagram????
that would sort me right outsmile

o yeah as 4 the pics- my bad ill c if i can flip em nex tym

__________________

{cams,valves,headaches }
Benneyboy


DTR Respected Member

Status: Offline
Posts: 72
Date:
Permalink  
 

leave that to me mate i should be able to get ya one buddy

__________________

my bikes aprillia af1 125 (striped down  project ) , honda mt 50 : h100 engine rebuilt all by me along with the crank !, supermoto wheels , motorhispna swing arm , usds forks , geneli pipe , more stuff planned looking to get another dtr soon though !
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 

thanks benneyboy mate if you could do that itd be great.
 

heres some photos of the loom just to see if anyone can help

if anyone knows if they got a cdi or ignition to suit then let me know
ill buy it off usmile.gif

cheers ppl

Attachments
__________________

{cams,valves,headaches }
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 

a cupol of the last photos show where some 1s chopped n changed sum wires i fink cant be sure tho.



Attachments
__________________

{cams,valves,headaches }
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 

i just bought this off ebay advertised as a 4dl cdi

pretty sure its what i need.

can anyone say for sure looking at the photos of my loom?

Attachments
__________________

{cams,valves,headaches }
....


Guru

Status: Offline
Posts: 665
Date:
Permalink  
 

whats written on the black box?? there should be lettering in white under where your rubber mount is sat over

__________________
ben350


Guru

Status: Offline
Posts: 418
Date:
Permalink  
 

I think the 4DL CDI's used the red cable covers like yours ;)

__________________

Aprilia Tuono 1000 + Honda Civic 1.6 VTi
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 

kool everyone, i been busy engines in dt carb and airbox all in,

just sorting out a few electrical bits.

and how bout that shiney new tank



-- Edited by fmanfman09 on Saturday 6th of February 2010 08:35:11 PM

Attachments
__________________

{cams,valves,headaches }
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 

[spoiler]

kool people,

its been a while aint been doin much with the dt due to the electrics pissin me off.

also had another project on my hands iv put a aprillia rs50 engine in a pit bike.

but while searching through the messy scrap pile that is my shed i found a few bits

i didnt think i still had.

like my dtre loom ,cdi and stuff.

so the plan is take the cylinder off the engine i bought and put it on the dtre bottom with the dtre loom and in theory i should be on road soon biggrin.gif

but as always i will probly find a few problems on the way..... ill try upload a few photos of what i bin up to.

__________________

{cams,valves,headaches }
DTPOWER


DTR Respected Member

Status: Offline
Posts: 81
Date:
Permalink  
 

wow that looks sick!

__________________
conn1987


DTR Senior Member

Status: Offline
Posts: 125
Date:
Permalink  
 

looking good mate

__________________
Dt125R 02 plate
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 

cheers conn n power , its a shame thats all its good 4 atm just sitting there looking pretty lol ah well it'll be worth it when i pull my finger out n put the work in.

__________________

{cams,valves,headaches }
fmanfman09


DTR Senior Member

Status: Offline
Posts: 107
Date:
Permalink  
 

side panel 99p off fleabay 10quid to post still bargain.thumbsup.gif



-- Edited by fmanfman09 on Saturday 15th of May 2010 06:23:00 PM

Attachments
__________________

{cams,valves,headaches }
dt_RR


DTR Member

Status: Offline
Posts: 12
Date:
Permalink  
 

 hi mate, i'm doing a dtr 2004 sm conversion with tdr wheels just like you so i wanted to ask a few questions .


1. Did you use the tdr forks to fit the front wheel ?

2. How did you fit the rear wheel ? ( mine doesn't fit blankstare )


thanks


__________________
«First  <  1 2 | Page of 2  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> Projects -> TDR 125 WHEELS ON A DT125RE
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard