DT125R ARCHIVE

zo0op · DTR Senior Member

oil lines

dt_powerd_senda · DTR Senior Member

hi mate there should be 2 pipes that comr from oil pump the thicker one goes up to the oil tank and the thin one goes to the little nipple on the rubber inlet manifold hope this helps

zo0op · DTR Senior Member

i know that much mate, its the pipes that go on to the oil pump im mixed up with

dt_powerd_senda · DTR Senior Member

ok 2 mins ill take a pic

dt_powerd_senda · DTR Senior Member

here ya go mate

zo0op · DTR Senior Member

iv only got the 1 at the top and the little gold 1 at the bottom :/ the 3rd nipple must have been pulled of

dt_powerd_senda · DTR Senior Member

might have to get new oil pump mate why just not keep it as premix ??

zo0op · DTR Senior Member

sick of mixin on petrol station duz ya head in i want my bike minted everythin there everythin done right ya get me?? i think them nipple just slip on

dt_powerd_senda · DTR Senior Member

ye i know wat ya mean mate might be a push fit nipple have a look mate

zo0op · DTR Senior Member

when they pulled the piped of the nipple must have come of with it

Dingle001 · DTR Senior Member

There are 2 different oil pumps, one type has 3 nipples as the picture but some are only 2 as standard.

zo0op · DTR Senior Member

my pump is the same as in the picture the nipple is just missing as there is a hole there for it

Dingle001 · DTR Senior Member

If you want to do a proper job you ll have to find a nipple off an old pump or replace the entire pump. Theres a pump on ebay at the moment for £23.98.

Im not sure what the nipple does. if someone on here can confirm it is not used then you could block up the hole, but only if you are confident that whatever you use wont fall out or affect oil flow inside the pump - not recommended.