jus bought a dtr, 2000 model, know nothing about bikes yet mechanically and i jus cant start it up??? ive looked on youtube and following the ways to do it but its not starting?? anyone know what it could be or how the best way to get it goin??
could be many things mate check its acualy geting fuel see maby try a new spark plug ,cut out switch as seiki said (may sound stupid but many peaple do it) thats all i can think of at the mo
Take plug out , put on head sparking ? fuel ? /Put fuel on the plug , if it starts you have a fuel problem to the cyclinder Compression , does it have any compression
yh, mate, go check the easiest things first that you might not have, like the cut out switch, i had that problem. :L check the fuel switch is on, and infact, if you have fuel in the tank although i shouldnt imagine its been run dry. >.>
well jus had a quick go at starting the bike... made sure it wasnt the kill switch which it isn't..... the fuel switch was on as well as the choke and petrols in the tank??? erm if its the battery howq would i know and if it is how would i charge the battery?? sorry bout all the questions people
Errrmmm that is weird mate, in that case make sure you are doing this:
- Kill switch = OFF (the red switch to the left of the throttle, make sure its on the setting with an arrow and no cross through it) - Fuel = ON (make sure there is fuel in tank lol) (the fuel tap is the left side, just below the tank) - Choke = ON (push it up, toward's the tank, its on the left side, below the tank, metal lever) - Try bump starting it (battery might not be powerful enough) - If start's run for 1-2 min's then......choke OFF! - Ow and also check there is 2 stroke oil in it lol
P.S if the worst was to happen, it sound's like it could be a heat sieze! Because my old Scooter (50cc 2 stroke) heat siezed, i was riding in the morning to college and all the way it kept miss firing but full working as normal! Then i got to college it started to splutter then cut out, and i tryed everything but had no luck had its fully rebuilt including the barrel as it had sized and ****ed barrel up i say it sound's like it could be because, my scooter started fine but cut out when any rev's applied then it FULLY stop working!
But it most likely is somthing little, it's just figuring it out
edited by craig to make it abit more clear lol.... -- Edited by CooS on Tuesday 8th of February 2011 08:25:32 PM
-- Edited by craigbulmer on Wednesday 9th of February 2011 03:40:58 AM