DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> Tuning -> NEW CARB ????
Post Info TOPIC: NEW CARB ????
DTR_NW


DTR Senior Member

Status: Offline
Posts: 141
Date:
NEW CARB ????
Permalink  
 

read on here that dt 125 is restricted in the carb is this true i have a 2006 dt 125 x with a full dep system the speedo restricted took the snorkle off the air box i just feel it could be faster the bottom end 

 

if so what carb do i fit to make it faster 

 

and wher can i get 

 

any help greatly appreciated 



__________________

2003 DTR Soon to be SUPERMOTO "IF YOUR NOT FAST YOUR LAST"

My DTR from start to finish

http://dt125r.activeboard.com/t49728429/03-dtr-partial-rebuild/?page=last
the only way is YAMAHA DTR


Guru

Status: Offline
Posts: 1290
Date:
Permalink  
 

tmx are good and are a good fit due to a shallow float bowl



__________________

 

 
satelliteone


DTR Senior Member

Status: Offline
Posts: 244
Date:
Permalink  
 

ya wana 1 of these!..



__________________

Project Yamaha TZR125RR Belgarda 4DL
satelliteone


DTR Senior Member

Status: Offline
Posts: 244
Date:
Permalink  
 

and the inlet rubber



__________________

Project Yamaha TZR125RR Belgarda 4DL
DTR_NW


DTR Senior Member

Status: Offline
Posts: 141
Date:
Permalink  
 

what is it and will it bolt straight on ?? i want a new carb i can fit my self with little experience tht will give me abit more power

__________________

2003 DTR Soon to be SUPERMOTO "IF YOUR NOT FAST YOUR LAST"

My DTR from start to finish

http://dt125r.activeboard.com/t49728429/03-dtr-partial-rebuild/?page=last
the only way is YAMAHA DTR


Guru

Status: Offline
Posts: 1290
Date:
Permalink  
 

that is a 32mm that is fitted to imported tzr's and tzr125rr

other tzrs have a 28mm,

will bolt on but jetting changes and throttle adjusting maybe needed



__________________

 

 
satelliteone


DTR Senior Member

Status: Offline
Posts: 244
Date:
Permalink  
 

YUP its a import 4dl inlet. i do believe and been told that a TZR250 3MA inlet rubbers fit too. dont know, never tried to find out.



__________________

Project Yamaha TZR125RR Belgarda 4DL
the only way is YAMAHA DTR


Guru

Status: Offline
Posts: 1290
Date:
Permalink  
 

do you know the code for that rubber intake or would sell it alone?

the one i modded it split and the carb im using is a 32mm flatslide

 



__________________

 

 
satelliteone


DTR Senior Member

Status: Offline
Posts: 244
Date:
Permalink  
 

i just done a search for the 3ma, without the spec on the holes, i cant tell if this will fit..


http://www.ebay.co.uk/itm/Yamaha-TZR250-Carb-Joint-L-R-NOS-Carburettor-MANIFOLD-/250732219056?pt=Motorcycles_Parts_Accessories&hash=item3a60ce0ab0


There is no part number on the 4DL rubber.


from the parts 4dl catalogue, 4DL-E3555-00-00 is what i get.

a right pain in the royal butt to find.. rocking horse poo... not going to part with mine..lol

or try

ring these guys, and quote the part number

http://www.fowlers.co.uk/






hope it helps tho...

__________________

Project Yamaha TZR125RR Belgarda 4DL
the only way is YAMAHA DTR


Guru

Status: Offline
Posts: 1290
Date:
Permalink  
 

ok cheers, the 250 1s are a bit to short but the one you got is a bit longer just what i need



__________________

 

 
satelliteone


DTR Senior Member

Status: Offline
Posts: 244
Date:
Permalink  
 

bit of alloy pipe and a bit of samco hose would sort it out iam sure.

__________________

Project Yamaha TZR125RR Belgarda 4DL
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> Tuning -> NEW CARB ????
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard