DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> CRANKS -> Crank rods etc
Post Info TOPIC: Crank rods etc
coastie123


DTR Senior Member

Status: Offline
Posts: 391
Date:
Crank rods etc
Permalink  
 

Right guys... I'm now in the middle of pitting my cases back together and now have come to a head scratch!!! Cases are together with new bearings, seals etc, and I can't remember which way the small spindles and the little ball bearing go.. I've got Small ball bearing, small spindle with thread and just another spindle, I know they go in the end of the crank but which way!!!! Sorry to be a pain!!

__________________

Blue DT Project Thread - OLD

Black DT Project Thread - NEW!!!
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

If I am correct they are the ones that go into the clutch mate. From clutch side they should go in the middle of the basket. Pushing it through the small whole.

 

Spindle, Ball bearing, spindle.


Then you need to adjust the pushrod thingy.



__________________

Always Originate, Never Pirate!

The Leviathan Project
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

Clutch housing:

 

DSCF0096.jpg

 

 

Spindle whole:

 

DSCF0084.jpg



__________________

Always Originate, Never Pirate!

The Leviathan Project
coastie123


DTR Senior Member

Status: Offline
Posts: 391
Date:
Permalink  
 

Yep that's the one!! Ones threaded and the other isn't so I'm guessing the one without goes in first, then the one with the thread last??

I've got a manual somewhere but put it down the other day and cannot remember for the life of me where!!!

__________________

Blue DT Project Thread - OLD

Black DT Project Thread - NEW!!!
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

Yeah that is it mate. Make sure you grease them up throughly when you place them in. Well that's what Haynes manual says.

__________________

Always Originate, Never Pirate!

The Leviathan Project
coastie123


DTR Senior Member

Status: Offline
Posts: 391
Date:
Permalink  
 

Spindle, bearing then threaded spindle!!!

Thanks for clearing that up!!!

__________________

Blue DT Project Thread - OLD

Black DT Project Thread - NEW!!!
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

Yep spot on.

__________________

Always Originate, Never Pirate!

The Leviathan Project
stroker


DTR Senior Member

Status: Offline
Posts: 221
Date:
Permalink  
 

Yep put the first rod in then ball bearing then the rod with the thread which then secures to the pressure plate

__________________

I GO TO WORK I FIX BIKES, I GO HOME I WORK ON BIKES, I GO TO SLEEP I DREAM BIKES! HEELLLPPPP :)
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> CRANKS -> Crank rods etc
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard