DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: where is the exhaust restrictor on my front pipe


DTR Respected Member

Status: Offline
Posts: 91
Date:
where is the exhaust restrictor on my front pipe
Permalink  
 


my exhaust says 3py-14610 its on a 2002 model i cut it in half to find the half  moons but there was nothing in the fat part of the pipe anybody know where it is on this pipe i dont think it is the propper pipe for it



__________________


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

The honeycombe? I think that's just for the RE/X no?

__________________

Always Originate, Never Pirate!

The Leviathan Project



DTR Respected Member

Status: Offline
Posts: 91
Date:
Permalink  
 

there nothing in it think ill just look for a propper pipe later put one with a cat on today to try but it heated up so hot it melted the exhaust rubber that connets the front and rear pipe up but it did go a lot faster the 3py pipe seemed to stuggle getting to 80kmh and this one went to 100kmh no probs

__________________


Guru

Status: Offline
Posts: 1017
Date:
Permalink  
 

Never heard of a 3py pipe. 3RM and 3MB are the two i know of. got a photo?

__________________
NEV


Guru

Status: Offline
Posts: 2515
Date:
Permalink  
 

The 3PY1 & 3PY2 was a bike made for the Italian market in 1989, the 3PY3 was again made for Italy but in 1991

__________________

 



DTR Respected Member

Status: Offline
Posts: 91
Date:
Permalink  
 

wel my bike runs under power on top end with it on and run to hot with the one with the cat on think its off a 2006 bike


__________________


Guru

Status: Offline
Posts: 1017
Date:
Permalink  
 

The one with the CAT will restrict it more than the 3py1 pipe. Checking the jetting with the 3py pipe on the bike.

__________________


DTR Respected Member

Status: Offline
Posts: 91
Date:
Permalink  
 

i have a 250 main jet any idea what size i should go to and any one know why the cat pipe 3rm get so hot it burns the ruber and platicks

__________________


DTR Respected Member

Status: Offline
Posts: 91
Date:
Permalink  
 

any ideas

__________________


DTR Respected Member

Status: Offline
Posts: 41
Date:
Permalink  
 

3rm dont have cats do they. has it got plastic or metal heat shield?

__________________


DTR Respected Member

Status: Offline
Posts: 91
Date:
Permalink  
 

plastic. just wounderd why it got so hot and was woundering what to jet up to on the unresticted 3py exhaust


__________________


DTR Respected Member

Status: Offline
Posts: 41
Date:
Permalink  
 

Ok is the tube/hole at the front of the exhaust sealed properly. And have you properly deristricted your bike also the ypy exhaust have you checked inside the pipe where it bolts on some pipes have a tube type restrictor

__________________


DTR Respected Member

Status: Offline
Posts: 91
Date:
Permalink  
 

yep nothing in there is great on bottom end just when u give it full frotle it doesnt do much u have to play it in slowly to get full throtle

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard