DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
DT125R Forum -> CRANKS -> got both crank seals which ones which ?
Post Info TOPIC: got both crank seals which ones which ?
Ralzy


Guru

Status: Offline
Posts: 853
Date:
got both crank seals which ones which ?
Permalink  
 

Its the RIGHT side has a spring on both sides 2 lips




-- Edited by Ralzy on Thursday 14th of March 2013 02:57:55 PM

__________________

 

 
stillbroke


Guru

Status: Offline
Posts: 668
Date:
Permalink  
 

as above ive got both seals but i cant make out which is the right and which is the left



__________________

getting there .....
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

I think there is a post somewhere explaining that the left one has a double lip. Summit like that. Have a look through norfes engine rebuild thread.

__________________

Always Originate, Never Pirate!

The Leviathan Project
stillbroke


Guru

Status: Offline
Posts: 668
Date:
Permalink  
 

figured it out in the end ,but im really worried about the engine as its so hard to turn over ,and its not got the head on its had all seals and bearings replaced

__________________

getting there .....
Calum122


Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

You should have paid about £50 for the bearings. Common mistake mate

__________________

Always Originate, Never Pirate!

The Leviathan Project
stillbroke


Guru

Status: Offline
Posts: 668
Date:
Permalink  
 

this is the code that i was TOLD to get : 6305r1

__________________

getting there .....
NEV


Guru

Status: Offline
Posts: 2515
Date:
Permalink  
 

6305R1 (16mm) Bearing Koyo Special Yamaha DT125R r/h Main I.D 25mm O.D 62mm x W 16mm £23.98
6305R1 (16mm) Bearing Koyo Special Yamaha DT125R r/h Main I.D 25mm O.D 62mm x W 16mm £23.98


__________________

 
stillbroke


Guru

Status: Offline
Posts: 668
Date:
Permalink  
 

came from yambits and they are the right bearings


__________________

getting there .....
stillbroke


Guru

Status: Offline
Posts: 668
Date:
Permalink  
 

these are definetely the right bearings if anyones been ordering any other code than whan 6305r1 theyve been buying wrong


__________________

getting there .....
slob


Guru

Status: Offline
Posts: 849
Date:
Permalink  
 

If your crank is stiff. You have probaly over/unevenly tightened the case bolts that hold the case together. First of all get a rubber mallet and give the end of the crank on the clutch side a good few dunts to seat it in the bearing, if that doesnt work undo the crank bolts and re do them evenly at the right tourque.



__________________
stillbroke


Guru

Status: Offline
Posts: 668
Date:
Permalink  
 

thanks slob will get round to it tonight


__________________

getting there .....
NORFE


DTR Trusted Engine Builder

Status: Offline
Posts: 1723
Date:
Permalink  
 

twin lipped/twin sprung is the right side seal....all in the manual images

 



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
DT125R Forum -> CRANKS -> got both crank seals which ones which ?
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard