DT125R ARCHIVE

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: jetting ...


DTR Senior Member

Status: Offline
Posts: 210
Date:
jetting ...
Permalink  
 


Hi guys, when buying your full DEp system from standard jetting what jetting did you change? just the main jet? or pilot jet too? ive just done my pilot jetting to 260 and it's alrite.. doesnt feel the best. what else can improve if not the jetting. thanks guys



__________________

''Regular maintenance is the key to reliability; irregular maintenance is the key to great exercise''



Guru

Status: Offline
Posts: 804
Date:
Permalink  
 

Most people go 240

__________________


DTR Senior Member

Status: Offline
Posts: 212
Date:
Permalink  
 

when fitting the dep pipe you don't need to change the carb settings at all on the dtr should be left standard which is 240 main jet



__________________


Guru

Status: Offline
Posts: 804
Date:
Permalink  
 

210 is standard on the later models after1998 I think

__________________


DTR Respected Member

Status: Offline
Posts: 43
Date:
Permalink  
 

i thought the 210 was on the earlier models ? ive been arsing around from 210-250, 240 just seems to be best can get the carb set up just fine with that no point changing imo

__________________

                             



Guru

Status: Offline
Posts: 7569
Date:
Permalink  
 

240 standard for DTR's and 210 is standard on DTRE's/X. I've ran a range from 300 main jet to 240.

You can use slightly thinner needles to make the mid range better. But it really is trial and error.

I put my standard ignition back on last night. Fck me. Makes you appreciate the Zeeltronic.

__________________

Always Originate, Never Pirate!

The Leviathan Project

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard