|
|
Brembo dtx caliper/ r125 caliper pads
(Preview)
So iv bought a yzf125r front brembo caliper for my sm conversion, just wondering if the pads from the dtx brembo caliper would fit, are they the same caliper with different bracket?? Any help would be good :)
|
dtr jim
|
0
|
1261
|
|
|
|
|
|
Brake Pads ?
(Preview)
Alright Boys .... been away a while ... V Strom 1000, that I always had .... Flogged it & bought Tiger 800 ... Then a 650 Versys... But the DT's getting dug out for this year. Just put new back tyre on (bald ) .. & thought I would stick some new pads in there while I'm at it ... any recommenda...
|
SimsonS51E
|
9
|
1740
|
|
|
|
|
|
Just put on front & rear brake pads..
(Preview)
thr front brake pads are on tight like i pull the leaver it only pulls so far it's closed up is this okay? or is it just the fact that they might need wearing in?
|
Grantypanty
|
3
|
1597
|
|
|
|
|
|
Front brake pad change HELP !
(Preview)
Ok i've got a 01 DTR with SM wheel set up, so the pads are a little different to the usually Enduro setup. I've taken the caliper off and removed the old pads, but now i cant seem to get the new pads to sit into place. They are the right pads but i was just wondering is there a technique to get them back into pla...
|
Mattydav
|
7
|
1572
|
|
|
|
|
|
brake pad thicness
(Preview)
going to take my dt to get moted and was wondering whats the minimum break pad thickness for a mot ps i looked and looked and couldent find anything on hear on google i read 1.5 mm but just duble checking
|
ToySoldier
|
2
|
1566
|
|
|
|
|
|
rear pads sticking
(Preview)
even when the piston is back in the caliper the pads are still gripping the disc fairly hard can anyone help thanks
|
gooner78
|
10
|
1973
|
|
|
|
|
|
Killed rear pads in 2 months
(Preview)
I fitted a set of Gold Fren K5-LX rear brake pads on my bike 2 months ago, ive done around 1500 miles since. They are now down to the metal again and need changing! This cant be normal! Ive done nearly 3000 miles on the front pads and they were on the bike when i got it. Ive just ordered some Gold Fren AD rear pad...
|
fray
|
6
|
1808
|
|
|
|
|
|
What pads to buy?
(Preview)
http://www.wemoto.com/bikes/Yamaha/DT_125_R/01-03/ need new ones, front n back, whats the best out of the selection? Brake Pads (per Caliper) And Shoes SectionBrake Pads GG or HHPads Front EBC Sintered (GG Type)£ 18.72Pads Front EBC Standard (GG Type)£ 16.66Pads Front Goldfren (HH Type)...
|
craigbulmer
|
10
|
1865
|
|
|
|
|
|
Pad change
(
1 2
)
(Preview)
While my bike is off the road im gona change the brake pads, any maybe the hoses. Are there any aftermarket pads that will make the breaking better or are they all the same? And when im doing it should i change the piston and seals? And craig if i haven't spoken to you on msn before you see this did the new hose...
|
woll
|
37
|
4418
|
|
|
|
|
|
changing rear pads
(Preview)
has any1 got a how to or anything on changing the rear pads i cant get my caliper loosend off and the manual pics are of another model .. thanks
|
wnp_uk
|
7
|
1827
|
|
|
|
|
|
Time to get some new brake pads for my dtx please help
(Preview)
Ive been told I need new front pads within the next 300 miles but figured i may aswell replace the rear ones too while im at it. So if anyoine can recommend some front and rear pads that are thatll give my bike a bit more stopping power than the standard dtx ones and where to buy them online I will be greatfull...
|
rmbukk
|
5
|
1396
|
|
|
|
|
|
brake pads
(Preview)
any advise on new brake pads,what type? just need them for standard road use,also cheapest place to buy from,thanks
|
medxb183
|
0
|
1276
|
|
|
