DT125R ARCHIVE

Bud4Real · Bud4Real

Hey guys, Well im looking for the motorcross type front plastic with the number plate to fit my DT 125R since I've now removed the front light. What should I be searching for or what other make/model of bikes number plate would fit? Im not looking for the registration plate, not to confuse anyone. Chee...

Uhe-95 · Uhe-95

Hi, i want to fix the rear end on on my dtx (dont like the tail light) so i am wondering if i can fit an ktm rear fender? and do the rear end have to the older types that comes in three parts? or a newer so its one pice? ;D and if you know any where i can get the fenders, i would apriciate if you could give me a link :D...

DTR-POWERVALVE-FTW · DTR-POWERVALVE-FTW

hi i finally got some polisport hand guards and fork guards but i didnt get a fitting kit doh!.....hand guards i can get a mate to think somethink but but how would i mount the fork guards any sneeky cheap ideas before i go buying kits would be cool guys!

Reef · Reef

Couldnt find anything on here so wondering what people use to de grease there panels before spraying?? if you buy a certain de greaser for this off the net, providing a link would be even better ;) Thanks

otty · otty

Is it possible? Specially rear end.

ezegreenfingers · ezegreenfingers

just sprayed this front mud gaurd any dont no how many coats of primer i should do just done 3 good coats gona wait till morning sand it down again but should i be adding more primer just dont no whats enuff -- Edited by ezegreenfingers on Wednesday 18th of July 2012 07:17:14 PM -- Edited by ezegreenfinger...

grifter · grifter

Right guys you probably all know by now i am new to all this just wondering if i can fit a hpires rear fender with a r&g tail tidy and a smaller rear light ??? Sorry for being a bit nooby and sorry if in wrong section, just trying to tidy up the back end....answers much appreiciated

eG x LoGiKzZ · eG x LoGiKzZ

anyone know where i could get those rear side panels and rear fender? unless this guy has somehow made them as one offs, looks really nice tho, what you lot think?

zander · zander

Subjet says it all.. I got myself a Polisport MMX headlight, but I'm curious how you modified it to fit? Post pics if you have :)

zander · zander

Hi I have some damaged plastics on my bike. I found a few topics about this already but the way they are damaged vary on each panel so it was hard to know which metod to use on which panel. Please advice for each picture below -- Edited by zander on Tuesday 29th of May 2012 01:14:35 PM

Reef · Reef

Right im planning to spray all of my RE panels black again and make them look as new as they can through sanding and what not You may be asking why bother when you can get new panels and a new sticker set, answer is i just love the variation of graphics on my bike and to save money for my bike test and not have the...

hairdoo · hairdoo

sorry if posted in wrong section how much is a clutch cable 4 a 2006 dt125x any ideas

zander · zander

Hi I'm about to buy a DT 125 RE soon. The rear fender looks quite odd to me, so what I'd like to know, is which other rear fenders would fit an RE from 2004-2006 WITHOUT ANY modding? I tried to look trough the forum for an answer, but all I could find was the Hpires, and I believe there are more rear fenders that...

romeopat · romeopat

just wondering if anyone knows a good place to get re plastics need both tank plastics and rear plastics

DTCrazedKid · DTCrazedKid

anyone know where I can get a white one of these mudguards from? checked that portugal dude and he's only got blue/black :( and i cant seem to find a white one

eG x LoGiKzZ · eG x LoGiKzZ

well ive planned to turn my tdr into a dt as the plastics ect on my tdr are mostly broken including the stupid front mudgaurd so does anyone know if a dt 125 mudgaurd will fit onto the tdr? only problem i see is maybe the radiator but i havent seen a dt mudguard so i dont know what it would be like

hairdoo · hairdoo

i guess its plastic so thort id post it ere can anyone suggest how i get that bolt out as its just all spinnin in the plastic as you turn the bolt head !!!

hairdoo · hairdoo

Any one got a way for removin over spray from plastics on bike ? wen my friend ? hmm welded up the plate on my rear frame 4 the tail tidy he sprayed the plate but unfortunatly he got it on plastics .

FREZOI · FREZOI

Anyone tell me how they atached the mesh to the back of the plastics on there bike, think it looks really smart but want it secure enough to not fall out, i have an idea of ways it could be done but id like to know from someone that has done it Cheers

MDK · MDK

any tips for restoring sundamge or faded plastics .? any one know any diy or of the shelf ways to get them good again I have some purple plastics that have sun damage fogging and would like them to look good again with out haveing to spray ? looked on youtube seen the scrapeing with a flat stanly knife blad...

ringo67 · ringo67

has any one tried to do there bike in vinyl wrap ? had a look on YouTube and you can get some smart finishes.the side panels front and back mud guards shouldn't be to hard but its the tank that could be tricky.this is something that i will be looking at when i finally get my dt

Energized · Energized

http://www.ebay.co.uk/itm/390381027166?ssPageName=STRK:MEWAX:IT&am...

ringo67 · ringo67

can you use yz plastics for a dt .what mods do you need to make ie cut and re weld holding nuts.

DTRJoeW · DTRJoeW

http://www.ebay.co.uk/itm/GARDE-BOUE-ARRIERE-CROSS-NOIR-YAMAHA-DTR125-DTR-125-/400279977060?pt=FR_JG_Moto_Pi%C3%A8ces&hash=item5d328bbc64

NORFE · NORFE

any 1 put a new model mudguard on an older dtr? straight fit or not?

Topic		Started By	Replies	Views	Last Post
	Headlight Cowling - Minus headlight (Preview) Hey guys, Well im looking for the motorcross type front plastic with the number plate to fit my DT 125R since I've now removed the front light. What should I be searching for or what other make/model of bikes number plate would fit? Im not looking for the registration plate, not to confuse anyone. Chee...	Bud4Real	4	329	Aug 30, 2012 by Scotsman30
	KTM Rear Fender on dtx (Preview) Hi, i want to fix the rear end on on my dtx (dont like the tail light) so i am wondering if i can fit an ktm rear fender? and do the rear end have to the older types that comes in three parts? or a newer so its one pice? ;D and if you know any where i can get the fenders, i would apriciate if you could give me a link :D...	Uhe-95	5	313	Aug 27, 2012 by eG x LoGiKzZ
	rookie mistake (Preview) hi i finally got some polisport hand guards and fork guards but i didnt get a fitting kit doh!.....hand guards i can get a mate to think somethink but but how would i mount the fork guards any sneeky cheap ideas before i go buying kits would be cool guys!	DTR-POWERVALVE-FTW	1	246	Aug 21, 2012 by GADGET
	De greasing panels for spraying?? (Preview) Couldnt find anything on here so wondering what people use to de grease there panels before spraying?? if you buy a certain de greaser for this off the net, providing a link would be even better ;) Thanks	Reef	8	242	Aug 8, 2012 by AndyYam
	yamaha dt125re plastics on dt125r? (Preview) Is it possible? Specially rear end.	otty	0	207	Aug 5, 2012 by otty
	fender mender ( 1 2 3 ) (Preview) just sprayed this front mud gaurd any dont no how many coats of primer i should do just done 3 good coats gona wait till morning sand it down again but should i be adding more primer just dont no whats enuff -- Edited by ezegreenfingers on Wednesday 18th of July 2012 07:17:14 PM -- Edited by ezegreenfinger...	ezegreenfingers	60	877	Jul 19, 2012 by GADGET
	Confused (Preview) Right guys you probably all know by now i am new to all this just wondering if i can fit a hpires rear fender with a r&g tail tidy and a smaller rear light ??? Sorry for being a bit nooby and sorry if in wrong section, just trying to tidy up the back end....answers much appreiciated	grifter	5	216	Jul 3, 2012 by grifter
	anyone know where to get these panels (Preview) anyone know where i could get those rear side panels and rear fender? unless this guy has somehow made them as one offs, looks really nice tho, what you lot think?	eG x LoGiKzZ	15	338	May 30, 2012 by eG x LoGiKzZ
	Polisport MMX headlight, how did you modify it to fit? (Preview) Subjet says it all.. I got myself a Polisport MMX headlight, but I'm curious how you modified it to fit? Post pics if you have :)	zander	6	257	May 30, 2012 by Seiki
	Damaged plastic, need help (Preview) Hi I have some damaged plastics on my bike. I found a few topics about this already but the way they are damaged vary on each panel so it was hard to know which metod to use on which panel. Please advice for each picture below -- Edited by zander on Tuesday 29th of May 2012 01:14:35 PM	zander	14	241	May 30, 2012 by zander
	Spraying my RE panels, with the stickers left on ;) (Preview) Right im planning to spray all of my RE panels black again and make them look as new as they can through sanding and what not You may be asking why bother when you can get new panels and a new sticker set, answer is i just love the variation of graphics on my bike and to save money for my bike test and not have the...	Reef	19	396	May 4, 2012 by Reef
	clutch cable (Preview) sorry if posted in wrong section how much is a clutch cable 4 a 2006 dt125x any ideas	hairdoo	8	271	Apr 27, 2012 by NORFE
	Yamaha DT 125 RE (Preview) Hi I'm about to buy a DT 125 RE soon. The rear fender looks quite odd to me, so what I'd like to know, is which other rear fenders would fit an RE from 2004-2006 WITHOUT ANY modding? I tried to look trough the forum for an answer, but all I could find was the Hpires, and I believe there are more rear fenders that...	zander	7	315	Apr 27, 2012 by zander
	re plastics (Preview) just wondering if anyone knows a good place to get re plastics need both tank plastics and rear plastics	romeopat	29	424	Apr 16, 2012 by Calum122
	white hpires rear mudguard (Preview) anyone know where I can get a white one of these mudguards from? checked that portugal dude and he's only got blue/black :( and i cant seem to find a white one	DTCrazedKid	2	233	Apr 7, 2012 by DTCrazedKid
	dt 125 mudgaurd on a tdr 125?? (Preview) well ive planned to turn my tdr into a dt as the plastics ect on my tdr are mostly broken including the stupid front mudgaurd so does anyone know if a dt 125 mudgaurd will fit onto the tdr? only problem i see is maybe the radiator but i havent seen a dt mudguard so i dont know what it would be like	eG x LoGiKzZ	3	192	Apr 3, 2012 by eG x LoGiKzZ
	mud flap (Preview) i guess its plastic so thort id post it ere can anyone suggest how i get that bolt out as its just all spinnin in the plastic as you turn the bolt head !!!	hairdoo	2	196	Apr 2, 2012 by hairdoo
	removin paint from plastics (Preview) Any one got a way for removin over spray from plastics on bike ? wen my friend ? hmm welded up the plate on my rear frame 4 the tail tidy he sprayed the plate but unfortunatly he got it on plastics .	hairdoo	2	189	Apr 1, 2012 by the only way is YAMAHA DTR
	Mesh behind panels? (Preview) Anyone tell me how they atached the mesh to the back of the plastics on there bike, think it looks really smart but want it secure enough to not fall out, i have an idea of ways it could be done but id like to know from someone that has done it Cheers	FREZOI	6	284	Mar 26, 2012 by tripr
	sundamaged plastics how to restore or fix (Preview) any tips for restoring sundamge or faded plastics .? any one know any diy or of the shelf ways to get them good again I have some purple plastics that have sun damage fogging and would like them to look good again with out haveing to spray ? looked on youtube seen the scrapeing with a flat stanly knife blad...	MDK	6	257	Mar 23, 2012 by the only way is YAMAHA DTR
	vinyl wrap? (Preview) has any one tried to do there bike in vinyl wrap ? had a look on YouTube and you can get some smart finishes.the side panels front and back mud guards shouldn't be to hard but its the tank that could be tricky.this is something that i will be looking at when i finally get my dt	ringo67	4	224	Mar 16, 2012 by the only way is YAMAHA DTR
	New tail tidy, bye, bye grab rail! (Preview) http://www.ebay.co.uk/itm/390381027166?ssPageName=STRK:MEWAX:IT&am...	Energized	16	341	Mar 15, 2012 by Energized
	plastic panels (Preview) can you use yz plastics for a dt .what mods do you need to make ie cut and re weld holding nuts.	ringo67	1	212	Mar 13, 2012 by the only way is YAMAHA DTR
	Hpires rear mudguard (Preview) http://www.ebay.co.uk/itm/GARDE-BOUE-ARRIERE-CROSS-NOIR-YAMAHA-DTR125-DTR-125-/400279977060?pt=FR_JG_Moto_Pi%C3%A8ces&hash=item5d328bbc64	DTRJoeW	4	256	Mar 11, 2012 by SUPERSTEVE
	rear mud guard (Preview) any 1 put a new model mudguard on an older dtr? straight fit or not?	NORFE	0	207	Mar 10, 2012 by NORFE
«First < 1 2 3 4 5 > Last» \| Page of 5 sorted by