DT125R ARCHIVE

Seiki · Seiki

Both the TDR125 and TDR125R will donate their parts for the DT125R Supermoto conversion with no mods , bolt on and ride !! The parts you need for the conversion from both bikes are as follows ... Front forks , NOT THE YOKES OR CLAMPS Front wheel , wheels spacers , speed cable and speed drive Complete front...

bandit123456 · bandit123456

has anyone on here fitted the yzfr125 wheels into dtr and wanting the spacer sizes and what front caliper they have used thanks

ringo67 · ringo67

gilera sc 125

Calum122 · Calum122

So got my wheels the other day :D Can't wait to get the forks back on and these fitted! Should have a look at this! Also managed to snag a 01 Rs125 front brake and fit it to the front wheel! Aparently the bloke said these older ones are better. :D Photo of my current front wheel against the new ones! Ph...

SMurF_12 · SMurF_12

So... dt125x hubs and rims powdercoated black with brand new spokes rebuilt by a professional and all new bearings and seals. Still unused... what would you value them at??

GoProKid95 · GoProKid95

Hi all, wanna look at sm-ing my 2006dtre. I want to keep the original forks for aditional front height but I need to know about caliper brackets, spacers and other stuff! :)

sebamax2 · sebamax2

well so both of the dts that im building have same issues :D one with gold wheels has a 35mm x 17 x 10 bearing silver wheels has a 40x17x12 so now what should i do now as there are no bearings avielable that are 32x20x? or 40x20x? i figured out 4 ways to go with this but im looking to find out which would be lets s...

Dt Danny · Dt Danny

Thinking of getting a set of sport demon but I have no idea what size ?

nathandtrpitt · nathandtrpitt

well can you put dtx sm wheels straight on to a 04 dtr (off road) ? the front disc looks bigger on the sm wheel but i should think you could just swap the disc's over ?

threadsta · threadsta

Hi guys just wondering if anyone can give me some advice. I bought a pair of dtr forks today to use with my excel dtx wheel and dtx brembro brake calliper I've already made up the bracket using a template I found on here but they didn't fit properly. Thanks! Matt

SMurF_12 · SMurF_12

Hello. Basically I was going to leave my bike in enduro trim but I have bloody changed my mind again. So I have had my swingarm powdercoated. Got new discs and pads and chain and sprockets. So I dont really want to try and sell all of that on then buy another front end and back end. So im thinking of getting 17...

Luke · Luke

Hi, got a DTX setup and my front pivot bolt from my DTR doesn't appear to fit, will the rear be the same? Or is there a way to get the DTR's to fit?

Luke · Luke

http://www.ebay.co.uk/itm/YAMAHA-YZF-R125-08-12-Front-Brake-Caliper-BREMBO-R-125-YZFR-YZFR125-/330974427182?pt=UK_Motorcycle_Parts_13&hash=item4d0f9cf82e

BigPhil · BigPhil

took my wheel out to take to get a new tyre and i cant get it back in. iv tried for ages and i cant get the spacers and caliper bracket to all fit in at once ? im not a idiot and i have taken various rear wheels of various bikes and put them in with out any problems, in the time iv been trying to put this wheel back in...

threadsta · threadsta

Hi guys, I recently did a dtx supermoto conversion on my DTR and I was wondering if anyone could help me. I don't like how much shorter the front end is because of the forks and I will be changing them to DTR forks soon But I would like to keep the dtx front brake so I will need to make up a bracket. I'm sure many p...

Boxing · Boxing

Hi, just wondering what the going price is for DTX wheels and forks? And I can't seem to find any on the ol' eBay. I don't know where to get them, so some pointers in the right direction would be welcomed.

Or alternative wheels that'll fit DTX forks when I get them? I was going to put this in the &quo...

otty · otty

Subject says it all. Regards!

Gambodia · Gambodia

http://www.gumtree.com/p/cars-vans-motorbikes/yamaha-xtdt-125-supermoto-wheels/1014208949

DTRJoeW · DTRJoeW

A'rightttt guyssss Im currently running the 18 & 21 inch motorcross style wheel at the moment, riding to work every morning and commuting on my knobblys is a pain and the tires are wearing so quick :( i was thinking of going 18inch supermoto, instead of 17inch, i had 17inch before and me being 6ft7,...

ShaunyBoy · ShaunyBoy

http://www.ebay.co.uk/itm/DT125-WHEELS-17-SUPER-MOTO-BARGIN-180-BREAKING-DT-MX-BIKES-NEW-USED-/170992758828?pt=UK_Motorcycle_Parts&hash=item27cff6702c

Grantypanty · Grantypanty

It's confusing. I doubt i'll do it as i'm heading for my big test in may but i jut wondered how it's done. & is it illegal to have no chain guard if you don't have any pillion pegs? Cheers amigos X

Jesse_DT · Jesse_DT

I've got an 06 dt125re and was wondering whether 06 sm wheels would just bolt straight in? Would i need the whole front end? Also, is there much of a difference between the dt sm wheels and the wr125 sm wheels? Could these fit?

NorDt · NorDt

Ok, so i noticed the warp rims are alot cheaper than excel rims. But are the warp rims still as good ?, im thinking maybe the warps will go bulgy if you take them offroading lol xD . Anyone know ??

grifter · grifter

Will cagiva mito wheels fit without to much hard graft? If so what else will be needed as i like the mag type wheels and there pretty cheap to. Thanks in advance, Grifter

dtr200691 · dtr200691

Done a supermoto conversion using dtx forks wheels n brakes but want my offroad wheels back in for snow wiil i have to change forks again or just switch front disc??

Topic		Started By	Replies	Views	Last Post
	STICKY: How to SM using other Yammy's (Preview) Both the TDR125 and TDR125R will donate their parts for the DT125R Supermoto conversion with no mods , bolt on and ride !! The parts you need for the conversion from both bikes are as follows ... Front forks , NOT THE YOKES OR CLAMPS Front wheel , wheels spacers , speed cable and speed drive Complete front...	Seiki	9	3934	Jun 9, 2012 by NorDt
	has anyone fit yzfr125 wheels into dtr (Preview) has anyone on here fitted the yzfr125 wheels into dtr and wanting the spacer sizes and what front caliper they have used thanks	bandit123456	1	1765	Dec 21, 2014 by Calum122
	getting the parts before the bike (Preview) gilera sc 125	ringo67	0	1751	Dec 6, 2014 by ringo67
	Can't Wait To Get These Fitted! :D SM (Preview) So got my wheels the other day :D Can't wait to get the forks back on and these fitted! Should have a look at this! Also managed to snag a 01 Rs125 front brake and fit it to the front wheel! Aparently the bloke said these older ones are better. :D Photo of my current front wheel against the new ones! Ph...	Calum122	8	2194	Nov 30, 2014 by Calum122
	value of wheels (Preview) So... dt125x hubs and rims powdercoated black with brand new spokes rebuilt by a professional and all new bearings and seals. Still unused... what would you value them at??	SMurF_12	0	1620	Oct 16, 2014 by SMurF_12
	Enduro to SM - What needs to be done, as much info as possible please! :) (Preview) Hi all, wanna look at sm-ing my 2006dtre. I want to keep the original forks for aditional front height but I need to know about caliper brackets, spacers and other stuff! :)	GoProKid95	1	1635	May 17, 2014 by Seiki
	bearing machining etc help / advise needed (Preview) well so both of the dts that im building have same issues :D one with gold wheels has a 35mm x 17 x 10 bearing silver wheels has a 40x17x12 so now what should i do now as there are no bearings avielable that are 32x20x? or 40x20x? i figured out 4 ways to go with this but im looking to find out which would be lets s...	sebamax2	9	1592	Apr 24, 2014 by DT-R_bradders
	Tyre sizes for the Dtx am wheels (Preview) Thinking of getting a set of sport demon but I have no idea what size ?	Dt Danny	1	1685	Apr 1, 2014 by SMurF_12
	dtx super moto wheels (Preview) well can you put dtx sm wheels straight on to a 04 dtr (off road) ? the front disc looks bigger on the sm wheel but i should think you could just swap the disc's over ?	nathandtrpitt	9	2261	Nov 3, 2013 by slob
	Helpp :) (Preview) Hi guys just wondering if anyone can give me some advice. I bought a pair of dtr forks today to use with my excel dtx wheel and dtx brembro brake calliper I've already made up the bracket using a template I found on here but they didn't fit properly. Thanks! Matt	threadsta	2	1520	Sep 21, 2013 by threadsta
	2002 dt125 sm help please (Preview) Hello. Basically I was going to leave my bike in enduro trim but I have bloody changed my mind again. So I have had my swingarm powdercoated. Got new discs and pads and chain and sprockets. So I dont really want to try and sell all of that on then buy another front end and back end. So im thinking of getting 17...	SMurF_12	5	1766	Aug 12, 2013 by SMurF_12
	DTR Pivot Bolts On DTX Forks? (Preview) Hi, got a DTX setup and my front pivot bolt from my DTR doesn't appear to fit, will the rear be the same? Or is there a way to get the DTR's to fit?	Luke	3	1563	Aug 12, 2013 by Luke
	DTX front caliper, question. (Preview) http://www.ebay.co.uk/itm/YAMAHA-YZF-R125-08-12-Front-Brake-Caliper-BREMBO-R-125-YZFR-YZFR125-/330974427182?pt=UK_Motorcycle_Parts_13&hash=item4d0f9cf82e	Luke	6	1909	Aug 8, 2013 by Luke
	Fitting rear whel (Preview) took my wheel out to take to get a new tyre and i cant get it back in. iv tried for ages and i cant get the spacers and caliper bracket to all fit in at once ? im not a idiot and i have taken various rear wheels of various bikes and put them in with out any problems, in the time iv been trying to put this wheel back in...	BigPhil	7	1792	Jul 29, 2013 by ToySoldier
	DTX wheel with DTR forks (Preview) Hi guys, I recently did a dtx supermoto conversion on my DTR and I was wondering if anyone could help me. I don't like how much shorter the front end is because of the forks and I will be changing them to DTR forks soon But I would like to keep the dtx front brake so I will need to make up a bracket. I'm sure many p...	threadsta	13	2209	May 27, 2013 by NEV
	DTX Wheels & Forks Prices? (Preview) Hi, just wondering what the going price is for DTX wheels and forks? And I can't seem to find any on the ol' eBay. I don't know where to get them, so some pointers in the right direction would be welcomed. Or alternative wheels that'll fit DTX forks when I get them? I was going to put this in the &quo...	Boxing	3	1612	May 24, 2013 by ShaunyBoy
	Will Yamaha FZR 250 wheels fit DT? (Preview) Subject says it all. Regards!	otty	5	1738	May 21, 2013 by NEV
	Nice price set of sumo wheels supermoto (Preview) http://www.gumtree.com/p/cars-vans-motorbikes/yamaha-xtdt-125-supermoto-wheels/1014208949	Gambodia	5	2201	Apr 12, 2013 by Gambodia
	18inch Sumo conversion? (Preview) A'rightttt guyssss Im currently running the 18 & 21 inch motorcross style wheel at the moment, riding to work every morning and commuting on my knobblys is a pain and the tires are wearing so quick :( i was thinking of going 18inch supermoto, instead of 17inch, i had 17inch before and me being 6ft7,...	DTRJoeW	2	2942	Apr 11, 2013 by ToySoldier
	can i just swop hubs (Preview) http://www.ebay.co.uk/itm/DT125-WHEELS-17-SUPER-MOTO-BARGIN-180-BREAKING-DT-MX-BIKES-NEW-USED-/170992758828?pt=UK_Motorcycle_Parts&hash=item27cff6702c	ShaunyBoy	6	1799	Mar 22, 2013 by Seiki
	How can i super moto convert my DTR into a DTX with just keeping the origenal forks & swing arm on? (Preview) It's confusing. I doubt i'll do it as i'm heading for my big test in may but i jut wondered how it's done. & is it illegal to have no chain guard if you don't have any pillion pegs? Cheers amigos X	Grantypanty	5	1920	Jan 30, 2013 by CarlosRexx
	SM Conversion Question (Preview) I've got an 06 dt125re and was wondering whether 06 sm wheels would just bolt straight in? Would i need the whole front end? Also, is there much of a difference between the dt sm wheels and the wr125 sm wheels? Could these fit?	Jesse_DT	14	1782	Jan 22, 2013 by Jesse_DT
	Warp supermoto rims ? Any good ? (Preview) Ok, so i noticed the warp rims are alot cheaper than excel rims. But are the warp rims still as good ?, im thinking maybe the warps will go bulgy if you take them offroading lol xD . Anyone know ??	NorDt	7	1725	Dec 21, 2012 by NorDt
	Thinking about the sm setup but i have a quick question (Preview) Will cagiva mito wheels fit without to much hard graft? If so what else will be needed as i like the mag type wheels and there pretty cheap to. Thanks in advance, Grifter	grifter	27	1749	Dec 18, 2012 by Skintt125
	Dtr wheels on dtx forks? (Preview) Done a supermoto conversion using dtx forks wheels n brakes but want my offroad wheels back in for snow wiil i have to change forks again or just switch front disc??	dtr200691	15	1629	Dec 11, 2012 by dtr200691
1 2 3 > Last» \| Page of 3 sorted by