DT125R ARCHIVE

NEV · NEV

DT125R KICKSTART ASSEMBLY[URL=http://imageshack.us/photo/my-images/96/kickstart2.jpg/][IMG]http://img96.imageshack.us/img9...

Calum122 · Calum122

DTRE/X Kick Start Conversion This is a tutorial for future reference for anyone who is thinking of or is going to carry out a kick start conversion for their DT125RE. This may also help if you are going to dismantle the clutch to replace/inspect or repair. It may also help if you wish to replace the ki...

zander · zander

So I bought the idle gear and kick mechanism of a friend who had lots of tzr spare parts. We fitted it and it worked very nice at his place. Half way home I started to hear a sound from the engine, sounded like the transmission was about to fall apart or smthing :D I pulled over and was gonna listen where it cam...

sebamax2 · sebamax2

Hi guys. So i wanted to put a kucker on the dtx but could not be bothered to wait for a delivery and i had notging better to do. I had a spare xt 125 engine. And it turns out the kick start is the same. So i removed it and it was a straight swap for the dt. Xt uses the same engine as ybr ttr some of the rjeju, derbis and...

zander · zander

Is the shaft that you put the idlegear on, when doing kickstart conversion, already there on the RE?

Victor · Victor

So decided i would replace my clutch plates/springs, no problems there. Bolted it all back up topped up oil and coolant and kicked her over and this http://youtu.be/rQkU3k_abOY I have a haynes and put the kickstart back from what i can see correctly, with the friction pin in the little hole. The ge...

BigPhil · BigPhil

Hi guys, went to take off my clutch cover and obviously the kick start has to be removed first, is there any simple way of doing this as trying to loosen the bolt just causes the kick start to go down (obviously) I'm thinking the way to do this could be something like put it in gear then hold in the brake so it c...

stillbroke · stillbroke

as above doesnt feel right to me

tunertom · tunertom

i have a spare tzr125 1987-1989 2rk/2rh bottom end sitting here doing nothing. i also have a 2004 dt125r sm, which has no kickstart shaft fitted, just the bung in its place would the tzr kick start bits all fit in the 2004 dt? so that i can get myself kicking the dt up instead of relying on the elec start?...

louisBOSS · louisBOSS

Hello people , bascially i took apart my side casing of which ive done plenty of times, this time when i put it all back. The kick start will like slip,then if i do it buy hand it will grip.My mates dt did this and he use to have to kick it wth the bike dead straight and it worked. Any help i would very helpful .

gasto · gasto

Hi guys.I have a problem with my kickstart.When i push it down slowly it goes freely down.If i try to kick it fast it will engage but not always.I removed the case cover to check it and everything seems fine. I tried again by hand without the cover to see if something was wrong. I can't understand how the ho...

fmanfman09 · fmanfman09

as some of u know im buildng up my dt125re (54 plate) but ive also got an older dtr engine (the one with the other water pump case) , anyway its got a kickstart, so i was wondering if it was possible to take the kickstart mechanism out of the dtr engine and fit it in the RE . has anyone done this or know if it'll wo...

richie · richie

hello is it possible to fit a kick start to a dtre 125 as mine hasnt got one and when am off road if my battery goes abit flat at least i can rely on the kick start

Topic		Started By	Replies	Views	Last Post
	STICKY: DT125R KICKSTART ASSEMBLY - PARTS BREAKDOWN (Preview) DT125R KICKSTART ASSEMBLY[URL=http://imageshack.us/photo/my-images/96/kickstart2.jpg/][IMG]http://img96.imageshack.us/img9...	NEV	0	1697	Jun 25, 2012 by NEV
	STICKY: DT125RE/X Kick Start Conversion Tutorial (closed) Kick Start Conversion RE 125 DT Idle Clutch Maintenance Circlips Thrust Washer Bolts Stainless Steel Nut Help Tutorial Modifications Upgrade How to (Preview) DTRE/X Kick Start Conversion This is a tutorial for future reference for anyone who is thinking of or is going to carry out a kick start conversion for their DT125RE. This may also help if you are going to dismantle the clutch to replace/inspect or repair. It may also help if you wish to replace the ki...	Calum122	7	17482	Mar 12, 2012 by xGINCATx
	Another kickstart problem (Preview) So I bought the idle gear and kick mechanism of a friend who had lots of tzr spare parts. We fitted it and it worked very nice at his place. Half way home I started to hear a sound from the engine, sounded like the transmission was about to fall apart or smthing :D I pulled over and was gonna listen where it cam...	zander	3	1779	Mar 17, 2014 by zander
	Yamaha xt 125 kicker on a dtr (Preview) Hi guys. So i wanted to put a kucker on the dtx but could not be bothered to wait for a delivery and i had notging better to do. I had a spare xt 125 engine. And it turns out the kick start is the same. So i removed it and it was a straight swap for the dt. Xt uses the same engine as ybr ttr some of the rjeju, derbis and...	sebamax2	0	1751	Nov 8, 2013 by sebamax2
	Question about Kickstart conversion (Preview) Is the shaft that you put the idlegear on, when doing kickstart conversion, already there on the RE?	zander	3	1625	Sep 16, 2013 by zander
	Kickstart wont disengage (Preview) So decided i would replace my clutch plates/springs, no problems there. Bolted it all back up topped up oil and coolant and kicked her over and this http://youtu.be/rQkU3k_abOY I have a haynes and put the kickstart back from what i can see correctly, with the friction pin in the little hole. The ge...	Victor	9	2001	Aug 21, 2013 by Victor
	Removing kick start (Preview) Hi guys, went to take off my clutch cover and obviously the kick start has to be removed first, is there any simple way of doing this as trying to loosen the bolt just causes the kick start to go down (obviously) I'm thinking the way to do this could be something like put it in gear then hold in the brake so it c...	BigPhil	3	1914	Apr 22, 2013 by Calum122
	shou;ld kickstart go all the way down to the foot peg ? (Preview) as above doesnt feel right to me	stillbroke	3	1762	Apr 18, 2013 by Boxing
	TZR and DT compatability? (Preview) i have a spare tzr125 1987-1989 2rk/2rh bottom end sitting here doing nothing. i also have a 2004 dt125r sm, which has no kickstart shaft fitted, just the bung in its place would the tzr kick start bits all fit in the 2004 dt? so that i can get myself kicking the dt up instead of relying on the elec start?...	tunertom	3	1800	Dec 2, 2012 by NEV
	kick start problem (Preview) Hello people , bascially i took apart my side casing of which ive done plenty of times, this time when i put it all back. The kick start will like slip,then if i do it buy hand it will grip.My mates dt did this and he use to have to kick it wth the bike dead straight and it worked. Any help i would very helpful .	louisBOSS	1	1660	Oct 12, 2012 by louisBOSS
	Kick start not engaging (Preview) Hi guys.I have a problem with my kickstart.When i push it down slowly it goes freely down.If i try to kick it fast it will engage but not always.I removed the case cover to check it and everything seems fine. I tried again by hand without the cover to see if something was wrong. I can't understand how the ho...	gasto	9	2128	Mar 14, 2012 by Calum122
	DT125RE kick start conversion.? ( 1 2 3 ) (Preview) as some of u know im buildng up my dt125re (54 plate) but ive also got an older dtr engine (the one with the other water pump case) , anyway its got a kickstart, so i was wondering if it was possible to take the kickstart mechanism out of the dtr engine and fit it in the RE . has anyone done this or know if it'll wo...	fmanfman09	62	9168	Mar 1, 2012 by Calum122
	dtre kick start (Preview) hello is it possible to fit a kick start to a dtre 125 as mine hasnt got one and when am off road if my battery goes abit flat at least i can rely on the kick start	richie	20	2713	Feb 29, 2012 by Calum122
Page 1 of 1 sorted by