DT125R ARCHIVE

NEV · NEV

DT125R CLOCKS[URL=http://imageshack.us/photo/my-images/35/clocks2.jpg/][IMG]http://img35.imageshack.us/img35/8057/clocks2.jp...

Luke · Luke

Hi all. The when the headlights are on, the speed-o doesn't light up, but the RPM bit does. I have a 1997 DTR model if it helps. I'm guessing the bulb has gone? How easy is it to replace and what kind of bulb are we talking?

Calum122 · Calum122

Happy Days and smiley faces as far as I'm concerned. The new upgrade to my bike has been long awaited for and was worth every penny. Everything felt pretty much catered for and I appreciated the Speedo drive cover. Just so that when you remove the speedo cable, Trial Tech gives you a plug to cover the driv...

NathanH · NathanH

Looking at fitting one to my DT (why not?) Speedo seems fairly straight forward as I could use and modify the R125 sensor and loom, as with the indicator lights etc, just a case of looking at which wire does what and splicing it into the DT loom. Rev guage is slightly harder to solve as its not a cable like th...

madrevs · madrevs

After taking apart my clocks yesterday I have found a red blade fuse with 2 blue crimp on connectors.it jas a red/blue wire and a white wire going to it.it is coming out of the back of the speedo and doesnt look standard .can anyone shed some light on this.also before I wrapped the qiring behind the headl...

dan28 · dan28

these clocks seem strange any idea what year of bike they are from an why do they have 2 neutral lights are they rare I cant find any other that are the same http://img547.imageshack.us/img547/2536/tumt.jpg

SMurF_12 · SMurF_12

Hello. I have purchased a speedo drive from the bay of e. As my bike is not ready to test it out i put a screwdriver in to twist it to check the cable spins but it doesnt. So i took the cable off and checked it spins and it does. I then put a screwdriver in my dtr speedo drive and when that spins the cable spins. So w...

SMurF_12 · SMurF_12

So im planning to change my dash and im wondering if any problems will arise by remove the restriction that you normally take out from the clocksbut not remove fully?? Thanks

Seiki · Seiki

Anyone got one? Just ordered one from Trailtech, didn't need all the sensor bolloks so only £65. Also why do people buy these off ebay? They're cheaper straight from Trailtech and easy over phone payment. Looks good, smaller than the Vapour so should fit snug

rebornrab · rebornrab

doesany body know the best way to install a rev counter on a 2005 DT125RE? Can I use a rev counter from an older model? Regards Richard

BigPhil · BigPhil

Alright guys, just a quick q. what bulbs do I need for my speedo and clocks background ? None of mine work bar one or two and I'm after some but not sure what to look for ? Cheers

dread123 · dread123

if i just turn igntion on are the clock lights supposed to light up or will they only turn on when engine running please? 2001 model? cna hear the powervalve turning etc when turned on, but no lights on clocks? also is wiring the headlights like others have done so that power to headlamps is on all time wis...

dread123 · dread123

anyone got any pics of where to install the speed sensor on the caliper please?? no idea where to install it too? not sure if to purchase the dashboard? £30 lot of money just for piece of plastic? thoughts?

dread123 · dread123

Right decided today that i am going to purchase either a vapor unit for my Dt125r to compliment my Halo Headlight. Been reading that its fairly easy mod to carryout and means that i can have my headlight sat correctly and less mess behind it hahaha There are not many posts on here regarding fitment and...

stillbroke · stillbroke

just been offered a nice set of clocks off a dtx wondered if they will fit ? cheers

tripr · tripr

just had a search for any info on this but cant find any so mines runnin at 86 not 76 i pressed the wong key soz 86 degrees C up to 99 an back down to 91 dependent on how hard its ridden is that ok just seems a little high to me -- Edited by tripr on Friday 15th of March 2013 10:57:06 AM

James Appleby · James Appleby

as said can these be opened as i thought they were a sealed unit ? as mine a dark

FunkeyMunkeyDavid · FunkeyMunkeyDavid

been looking for some clocks for a while,which will end up on my q plater. had to be cheap as i want to have a crack at enduro as well of lots of green laning = lots of accidents so vapour's were off the list. found some 4dl clocks for 20 squid on e-gay. and fook me,their massive [IMG]https://i1094.photobuc...

DTR-POWERVALVE-FTW · DTR-POWERVALVE-FTW

basicly lads my rev clock had a momentg and has rev'd past 12k jw if its fixable its spun all way round ???

ben_1_ · ben_1_

alright lads just wondering if they do a replace clock/speed (what ever you want to call it ;) ) face, like where the numbers are as my black background is starting to show that it is 22 years old, id like a white and blue one. If you know where i can get them please let me know, if you can't get them i reckon th...

Seanyftw · Seanyftw

So yeah picked bike up last night, just one issue, we couldn't get the nuetral light or oil light to work, connector going into the clocks was a little corroded so cleaned that up with WD40 and cotton buds/brush thingy but still no luck. Indicator/hibeam lights work fine. Anyone have any ideas? They w...

AndyYam · AndyYam

Not sure if anyone has covered this before but I had some KPH clocks and plan to put a converter on the back so the run in mph from now on. Obviously the clocks were showing the km covered so I needed to reset from 29k to 17m (roughly). I stripped back the clocks and re set. Once i get a chance i'll post up photos...

CarlosRexx · CarlosRexx

it's doing my head in.. I can't see where they would connect to.

Brewski92 · Brewski92

Does anyone know how the internals of the rev counter works? Since dropping my bike mine hasnt worked The cable spins the little metal bell it goes into but it doesnt seem to connect to anything else! Any ideas? Cheers!

ToySoldier · ToySoldier

anyone had there screens on there clocks crack i pulled up at home and they looked fine came out about a houre later and there all cracked but not as in smashed as in strees cracks and im confused has anyone else experianced this

Topic		Started By	Replies	Views	Last Post
	STICKY: DT125R CLOCKS - PARTS BREAKDOWN (Preview) DT125R CLOCKS[URL=http://imageshack.us/photo/my-images/35/clocks2.jpg/][IMG]http://img35.imageshack.us/img35/8057/clocks2.jp...	NEV	0	2105	Jun 24, 2012 by NEV
	Light Behind The Speed-o Clock Doesn't Work? (Preview) Hi all. The when the headlights are on, the speed-o doesn't light up, but the RPM bit does. I have a 1997 DTR model if it helps. I'm guessing the bulb has gone? How easy is it to replace and what kind of bulb are we talking?	Luke	1	2150	Sep 28, 2014 by MDK
	Installed Vapor Stealth On RE ( 1 2 3 ) Vapor Stealth FTW (Preview) Happy Days and smiley faces as far as I'm concerned. The new upgrade to my bike has been long awaited for and was worth every penny. Everything felt pretty much catered for and I appreciated the Speedo drive cover. Just so that when you remove the speedo cable, Trial Tech gives you a plug to cover the driv...	Calum122	62	8322	Mar 29, 2014 by georgen
	YZF R125 clocks (Preview) Looking at fitting one to my DT (why not?) Speedo seems fairly straight forward as I could use and modify the R125 sensor and loom, as with the indicator lights etc, just a case of looking at which wire does what and splicing it into the DT loom. Rev guage is slightly harder to solve as its not a cable like th...	NathanH	5	2400	Feb 20, 2014 by sebamax2
	fuse in back of speedo 2003 dtr ( 1 2 3 ) (Preview) After taking apart my clocks yesterday I have found a red blade fuse with 2 blue crimp on connectors.it jas a red/blue wire and a white wire going to it.it is coming out of the back of the speedo and doesnt look standard .can anyone shed some light on this.also before I wrapped the qiring behind the headl...	madrevs	74	7714	Jan 15, 2014 by madrevs
	clocks with 2 neutral lights (Preview) these clocks seem strange any idea what year of bike they are from an why do they have 2 neutral lights are they rare I cant find any other that are the same http://img547.imageshack.us/img547/2536/tumt.jpg	dan28	1	1925	Nov 24, 2013 by Calum122
	speedo drive help please (Preview) Hello. I have purchased a speedo drive from the bay of e. As my bike is not ready to test it out i put a screwdriver in to twist it to check the cable spins but it doesnt. So i took the cable off and checked it spins and it does. I then put a screwdriver in my dtr speedo drive and when that spins the cable spins. So w...	SMurF_12	5	2140	Nov 15, 2013 by SMurF_12
	dash change and restriction (Preview) So im planning to change my dash and im wondering if any problems will arise by remove the restriction that you normally take out from the clocksbut not remove fully?? Thanks	SMurF_12	1	2184	Oct 8, 2013 by dread123
	Trailtech Endurance 2 (Preview) Anyone got one? Just ordered one from Trailtech, didn't need all the sensor bolloks so only £65. Also why do people buy these off ebay? They're cheaper straight from Trailtech and easy over phone payment. Looks good, smaller than the Vapour so should fit snug	Seiki	28	3531	Jun 27, 2013 by ShaunyBoy
	Installing a rev counter on a 2005RE (Preview) doesany body know the best way to install a rev counter on a 2005 DT125RE? Can I use a rev counter from an older model? Regards Richard	rebornrab	18	4188	Jun 12, 2013 by ShaunyBoy
	Clock bulbs (Preview) Alright guys, just a quick q. what bulbs do I need for my speedo and clocks background ? None of mine work bar one or two and I'm after some but not sure what to look for ? Cheers	BigPhil	2	2141	Apr 26, 2013 by BigPhil
	clocks and lights ?? (Preview) if i just turn igntion on are the clock lights supposed to light up or will they only turn on when engine running please? 2001 model? cna hear the powervalve turning etc when turned on, but no lights on clocks? also is wiring the headlights like others have done so that power to headlamps is on all time wis...	dread123	6	2456	Apr 18, 2013 by dread123
	vapor install help pls? (Preview) anyone got any pics of where to install the speed sensor on the caliper please?? no idea where to install it too? not sure if to purchase the dashboard? £30 lot of money just for piece of plastic? thoughts?	dread123	7	2241	Apr 12, 2013 by slob
	Traial #tech vapor or other digital clocks (Preview) Right decided today that i am going to purchase either a vapor unit for my Dt125r to compliment my Halo Headlight. Been reading that its fairly easy mod to carryout and means that i can have my headlight sat correctly and less mess behind it hahaha There are not many posts on here regarding fitment and...	dread123	21	4158	Apr 4, 2013 by Seiki
	offered dtx clocks for £25 do they fit the r ? (Preview) just been offered a nice set of clocks off a dtx wondered if they will fit ? cheers	stillbroke	0	1975	Mar 17, 2013 by stillbroke
	whats a stable running temp using digital clock (Preview) just had a search for any info on this but cant find any so mines runnin at 86 not 76 i pressed the wong key soz 86 degrees C up to 99 an back down to 91 dependent on how hard its ridden is that ok just seems a little high to me -- Edited by tripr on Friday 15th of March 2013 10:57:06 AM	tripr	2	2132	Mar 16, 2013 by tripr
	isit possible to open the clocks from a 1991 dt 125 ? (Preview) as said can these be opened as i thought they were a sealed unit ? as mine a dark	James Appleby	20	3024	Feb 11, 2013 by James Appleby
	massive clock (Preview) been looking for some clocks for a while,which will end up on my q plater. had to be cheap as i want to have a crack at enduro as well of lots of green laning = lots of accidents so vapour's were off the list. found some 4dl clocks for 20 squid on e-gay. and fook me,their massive [IMG]https://i1094.photobuc...	FunkeyMunkeyDavid	26	3279	Sep 28, 2012 by fused420
	rev clock issue (Preview) basicly lads my rev clock had a momentg and has rev'd past 12k jw if its fixable its spun all way round ???	DTR-POWERVALVE-FTW	10	2365	Aug 20, 2012 by AndyYam
	Clock / Speedo faces replace? (Preview) alright lads just wondering if they do a replace clock/speed (what ever you want to call it ;) ) face, like where the numbers are as my black background is starting to show that it is 22 years old, id like a white and blue one. If you know where i can get them please let me know, if you can't get them i reckon th...	ben_1_	6	2213	Jul 28, 2012 by GADGET
	Nuetral switch and Oil light not working? :/ (Preview) So yeah picked bike up last night, just one issue, we couldn't get the nuetral light or oil light to work, connector going into the clocks was a little corroded so cleaned that up with WD40 and cotton buds/brush thingy but still no luck. Indicator/hibeam lights work fine. Anyone have any ideas? They w...	Seanyftw	5	2588	Jul 27, 2012 by SUPERSTEVE
	Re-setting clock dials (Preview) Not sure if anyone has covered this before but I had some KPH clocks and plan to put a converter on the back so the run in mph from now on. Obviously the clocks were showing the km covered so I needed to reset from 29k to 17m (roughly). I stripped back the clocks and re set. Once i get a chance i'll post up photos...	AndyYam	0	1864	Jul 11, 2012 by AndyYam
	What do these wires connect to? (Preview) it's doing my head in.. I can't see where they would connect to.	CarlosRexx	3	1790	Jun 13, 2012 by NORFE
	Rev counter not working (Preview) Does anyone know how the internals of the rev counter works? Since dropping my bike mine hasnt worked The cable spins the little metal bell it goes into but it doesnt seem to connect to anything else! Any ideas? Cheers!	Brewski92	14	1921	May 15, 2012 by fused420
	cracked clocks (Preview) anyone had there screens on there clocks crack i pulled up at home and they looked fine came out about a houre later and there all cracked but not as in smashed as in strees cracks and im confused has anyone else experianced this	ToySoldier	17	2436	May 15, 2012 by fused420
1 2 > Last» \| Page of 2 sorted by