DT125R ARCHIVE

madrevs · madrevs

Hi bought another carb front off ebay with a rounded mixture screw managed to get old one out but new one will only screw in 3 turns have retapped a 5mm thread but will still only go in 3 turns is this normal.

superted · superted

hi does any one know where I can get the inline net filter that sits in the carb apart from aj Sutton thanks

zander · zander

I'm thinking of putting a bigger carb on the dt as soon as i get it running again since the airscrew got ****ed up plus I want more power out of the DT haha (I'll get the cylinder from a rebore in the end of the week, and the piston n everything) So I was thinking the tm32, but I found out that tm34 had the same dim...

dread123 · dread123

anyone had any symptoms yet? had my first of the year today...felt like i was running out of fuel previously had the pipes that run to the carb disconnected which will not help in cold weather. so gonna have to look out for a set now!! If anyone has 2 of the pipes..pls pm me a price..infact i only new one i t...

madrevs · madrevs

Hi does anyone know where I can get a main jet kit for a 2003 dtr125.stupidly tightened up tge main jet with grips as didnt have a 6 mm spanner and snapped it at the threads where it screws into the brass thread.managed to screw it in with the last remaining threadsand runs fine but exhaust tone has changed...

yamahayz125 · yamahayz125

http://twostrokemotocross.com/2009/12/carburetor-theory-and-tuning/-- Edited by yamahayz125 on Monday 17th of March 2014 10:30:22 PM

phils · phils

hey guys does anyone know what size the over flow pipes are i need to know the internal diameter cheers

zooankski · zooankski

Anyone know the diameter jubilee clip i need to put around the back end of the carb that connects to the air cleaner?

Reef · Reef

After changing the jet we put everything back together and now when turnin the fuel tap on with the ignition off the over flow pipes pump out loads of fuel?? Any one know what we could have done wrong?? Much appreciated if some1 could give some advice asap NEW UPDATE :/ Ay that's all sorted, it was the floa...

ShaunyBoy · ShaunyBoy

So, overnight my carb has decided it's gonna start leaking, not sure where it's coming from. As the carb is soaked. A where can I get a set of gaskets for the carb quick?

Seanyftw · Seanyftw

So yeah, got a replacement carb from DeeteeMX which was sent to NORFE with my engine, been cleaned etc and setup for standard settings throughout. Now since i got the engine etc back my bike simply will not run unless the choke is on, it'll just bog down and die out, so i thought pilot jet as i've had this pr...

SMurF_12 · SMurF_12

Has anyone fitted a bigger carb to their dt?? What size and which carb did you get?? Isit worth it?? Maybe looking at a 170 bore kit too.

Calum122 · Calum122

Ok so I didn't realise how diverse and expansive the carburettor universe is! I'm reading loads of contradictory information. Loads of information all together that is. Coming from a performance point of view what is the best carb to buy? It looks to me that there are so many to choose from. And the bi...

WoZz · WoZz

- -- Edited by WoZz on Friday 12th of July 2013 01:08:58 PM

The_DtR_Maniac1991 · The_DtR_Maniac1991

I'm thinking this is a carb problem, I bought the new DEP expansion chamber for my dt 125r 2002 (i have rear can also) with standard expansion acceleration was good, now with DEP EXPANSION CHAMBER, theres a flat spot, then all of a sudden it jumps to higher revs and goes, im thinking do i need to adjust the...

zander · zander

for f*ck sake! when I tried to take the old airscrew out with a so called screw extractor, it broke of, and now it's stuck for sure only way would be to melt it out since it's made out of brass, but I guess I'll make the hole to the airbox a bit bigger until it runs fine ... and I'm still waiting on the piston and t...

slob · slob

Still not sorted my bike yet. I started it today and it was still revving 95% sure the carb is the problem, The bike is definatley running rich as there is plenty black oil in the rear silancer and the plug was saturated. My car mechanic mate reckons it is revving cause of fuel when he seen it, would my float...

zander · zander

My air screw is stuck so i need to drill it out and replace it. But whats the model name on the carb? I have a -06 RE If someone happens to know from where to get the exact right one, please link :) -- Edited by zander on Saturday 11th of May 2013 01:18:47 PM

dread123 · dread123

Been offered a dt200r carb at very good price... is it a straight swap? Any benfit to fitting them?

dread123 · dread123

The throttle slide on my carb doesnt seem to sit at bottom of carb.throttle screw is not in so thats not the problem?throttle cable adjuster is all way in. Not sure what problem...any ideas..doesnt seem sny tight spots on cable either? Any other adjusters on cable? Gonna order new cable

ezegreenfingers · ezegreenfingers

Did a little water test today and when I put the hose over the carb it cuts out do i need to replace gaskets or seals or something

superted · superted

hi rebulit engine a 6 weeks ago and is fully warn in now, bike power seems to be fine but my bike has trobble starting some times need 7 kicks also wont start without choke on, but the worst thing is idles at 1400 rev fine ride down road stop at lights ect it ill idle fine the drop to where nearly dies then pic...

benjarminx · benjarminx

Just snapped a bolt ); The one that holds on the carb to the engine How do i get it out!

stillbroke · stillbroke

as above thanks

benjarminx · benjarminx

hi guys just wondering if theres anypoint trying to get parts for this as ive seen them go for quiet alot ): thanks [IMG]https://i761.photobucke...

Topic		Started By	Replies	Views	Last Post
	mixture screw (Preview) Hi bought another carb front off ebay with a rounded mixture screw managed to get old one out but new one will only screw in 3 turns have retapped a 5mm thread but will still only go in 3 turns is this normal.	madrevs	8	208	Jan 22, 2014 by madrevs
	fuel filter (Preview) hi does any one know where I can get the inline net filter that sits in the carb apart from aj Sutton thanks	superted	0	106	Dec 27, 2013 by superted
	Getting a bigger carburetor ( 1 2 ) Mikuni Flatslide 32mm 34mm carburetor carb tuning 30mm tmx tm (Preview) I'm thinking of putting a bigger carb on the dt as soon as i get it running again since the airscrew got ****ed up plus I want more power out of the DT haha (I'll get the cylinder from a rebore in the end of the week, and the piston n everything) So I was thinking the tm32, but I found out that tm34 had the same dim...	zander	45	40248	Dec 17, 2013 by yamahayz125
	carb icing? (Preview) anyone had any symptoms yet? had my first of the year today...felt like i was running out of fuel previously had the pipes that run to the carb disconnected which will not help in cold weather. so gonna have to look out for a set now!! If anyone has 2 of the pipes..pls pm me a price..infact i only new one i t...	dread123	7	178	Nov 28, 2013 by Liam12
	snapped off main jet jet kit needed (Preview) Hi does anyone know where I can get a main jet kit for a 2003 dtr125.stupidly tightened up tge main jet with grips as didnt have a 6 mm spanner and snapped it at the threads where it screws into the brass thread.managed to screw it in with the last remaining threadsand runs fine but exhaust tone has changed...	madrevs	9	172	Nov 27, 2013 by madrevs
	Carb tuning (Preview) http://twostrokemotocross.com/2009/12/carburetor-theory-and-tuning/-- Edited by yamahayz125 on Monday 17th of March 2014 10:30:22 PM	yamahayz125	0	159	Nov 27, 2013 by yamahayz125
	over flow pipe (Preview) hey guys does anyone know what size the over flow pipes are i need to know the internal diameter cheers	phils	4	128	Nov 24, 2013 by phils
	jubilee clip to air filter (Preview) Anyone know the diameter jubilee clip i need to put around the back end of the carb that connects to the air cleaner?	zooankski	5	164	Nov 16, 2013 by Reef
	CARB PROBLEM, BIGGER PROBLEMS :/ HELPPP ( 1 2 3 4 5 … 6 ) (Preview) After changing the jet we put everything back together and now when turnin the fuel tap on with the ignition off the over flow pipes pump out loads of fuel?? Any one know what we could have done wrong?? Much appreciated if some1 could give some advice asap NEW UPDATE :/ Ay that's all sorted, it was the floa...	Reef	152	1722	Oct 21, 2013 by Reef
	Leaky carb (Preview) So, overnight my carb has decided it's gonna start leaking, not sure where it's coming from. As the carb is soaked. A where can I get a set of gaskets for the carb quick?	ShaunyBoy	5	141	Aug 24, 2013 by MDK
	Not running off choke. (Preview) So yeah, got a replacement carb from DeeteeMX which was sent to NORFE with my engine, been cleaned etc and setup for standard settings throughout. Now since i got the engine etc back my bike simply will not run unless the choke is on, it'll just bog down and die out, so i thought pilot jet as i've had this pr...	Seanyftw	14	205	Aug 21, 2013 by zander
	bigger carb ?? (Preview) Has anyone fitted a bigger carb to their dt?? What size and which carb did you get?? Isit worth it?? Maybe looking at a 170 bore kit too.	SMurF_12	2	133	Aug 16, 2013 by SMurF_12
	Carburettors For Noobs! Carb Tuning TMX TM VHSA MIKUNI Dell'orto (Preview) Ok so I didn't realise how diverse and expansive the carburettor universe is! I'm reading loads of contradictory information. Loads of information all together that is. Coming from a performance point of view what is the best carb to buy? It looks to me that there are so many to choose from. And the bi...	Calum122	1	1528	Jul 24, 2013 by zander
	Bogging down? (Preview) - -- Edited by WoZz on Friday 12th of July 2013 01:08:58 PM	WoZz	18	373	Jun 29, 2013 by GADGET
	CARB PROBLEM WITH DEP EXPANSION (Preview) I'm thinking this is a carb problem, I bought the new DEP expansion chamber for my dt 125r 2002 (i have rear can also) with standard expansion acceleration was good, now with DEP EXPANSION CHAMBER, theres a flat spot, then all of a sudden it jumps to higher revs and goes, im thinking do i need to adjust the...	The_DtR_Maniac1991	6	177	Jun 20, 2013 by fused420
	Airscrew is stuck (Preview) for f*ck sake! when I tried to take the old airscrew out with a so called screw extractor, it broke of, and now it's stuck for sure only way would be to melt it out since it's made out of brass, but I guess I'll make the hole to the airbox a bit bigger until it runs fine ... and I'm still waiting on the piston and t...	zander	3	125	Jun 17, 2013 by zander
	Bike running to rich causing revving float to high? (Preview) Still not sorted my bike yet. I started it today and it was still revving 95% sure the carb is the problem, The bike is definatley running rich as there is plenty black oil in the rear silancer and the plug was saturated. My car mechanic mate reckons it is revving cause of fuel when he seen it, would my float...	slob	11	224	Jun 16, 2013 by dread123
	Model name on carb? (Preview) My air screw is stuck so i need to drill it out and replace it. But whats the model name on the carb? I have a -06 RE If someone happens to know from where to get the exact right one, please link :) -- Edited by zander on Saturday 11th of May 2013 01:18:47 PM	zander	7	207	Jun 15, 2013 by zander
	dt200 carb (Preview) Been offered a dt200r carb at very good price... is it a straight swap? Any benfit to fitting them?	dread123	1	115	Jun 11, 2013 by Calum122
	throttle slide? (Preview) The throttle slide on my carb doesnt seem to sit at bottom of carb.throttle screw is not in so thats not the problem?throttle cable adjuster is all way in. Not sure what problem...any ideas..doesnt seem sny tight spots on cable either? Any other adjusters on cable? Gonna order new cable	dread123	7	146	Apr 14, 2013 by dread123
	Carb cuts out bike (Preview) Did a little water test today and when I put the hose over the carb it cuts out do i need to replace gaskets or seals or something	ezegreenfingers	6	158	Apr 1, 2013 by ezegreenfingers
	carb idle problem (Preview) hi rebulit engine a 6 weeks ago and is fully warn in now, bike power seems to be fine but my bike has trobble starting some times need 7 kicks also wont start without choke on, but the worst thing is idles at 1400 rev fine ride down road stop at lights ect it ill idle fine the drop to where nearly dies then pic...	superted	8	189	Mar 4, 2013 by superted
	Snapped bolt ffs (Preview) Just snapped a bolt ); The one that holds on the carb to the engine How do i get it out!	benjarminx	7	160	Feb 18, 2013 by benjarminx
	does the dt 125x carb fit the dt125r ? (Preview) as above thanks	stillbroke	14	177	Feb 17, 2013 by stillbroke
	do i rebuild this carb? (Preview) hi guys just wondering if theres anypoint trying to get parts for this as ive seen them go for quiet alot ): thanks [IMG]https://i761.photobucke...	benjarminx	3	146	Feb 5, 2013 by NEV
«First < 1 2 3 4 > Last» \| Page of 4 sorted by